EUVIMEDEUVIMED entdecken
Crossref

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSb 2 Se 4

Panpan Peng, Chao Wang iD, Shengqiang Cui, Chunhui Wang, Jing Chen, Min Hao, Xudong Huang, Xinxin Wang, Yajing Wang, Zhenxiang Cheng iD, Jianli Wang iD

ACS Applied Materials & Interfaces · 27.09.2023 · 15 (38) · 45016-45025

DOI: 10.1021/acsami.3c09995 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 13.09.2023. Verfasst von Panpan Peng und 10 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Computational Materials Science, School of Physics and Electronics, Henan University, Kaifeng 475004, P. R. China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The manipulation of defect chemistry is crucial in the design of high-performance thermoelectric materials. Studies have demonstrated that alloying compounds within the I-V-VI2 family, such as AgSbTe2, NaSbTe2, etc., can effectively enhance the thermoelectric performance of SnTe by controlling the hole concentration and reducing the lattice thermal conductivity. In this paper, samples of SnTe alloyed with MnSb2Se4 were prepared, and the microstructure, electrical properties, and thermal properties were thoroughly investigated. Based on SEM and TEM analysis, it was observed that MnSb2Se4 can dissolve into SnTe during the preparation of the samples, which leads to the formation of various secondary phases with different compositions and point defects. Consequently, the lattice thermal conductivity is reduced to 0.44 W m-1 K-1 at 800 K, approaching the amorphous limit. Furthermore, the diffusion of the Mn and Sb elements leads to a significant improvement in the Seebeck coefficient through valence band convergence. The vacancy concentration in SnTe can also be modulated by alloying with MnSb2Se4. The findings indicated that MnSb2Se4 alloying can enhance the thermoelectric performance of SnTe through increasing the vacancy concentration, promoting valence band convergence, and introducing secondary phases. Consequently, a ZT value of 1.36 at 800 K for Sn1.03Te-5%MnSb2Se4 can be achieved.

Schlagwörter

Stichwörter der Autor:innen

SnTesecondary phasesthermoelectricvacancyvalence band convergence

Autor:innen und Institutionen

  • Institute for Computational Materials Science, School of Physics and Electronics, Henan University, Kaifeng 475004, P. R. China.
  • Department of Technology and Physics, Zhengzhou University of Light Industry, Zhengzhou 450002, China.
  • Institute for Superconducting and Electronic Materials, Innovation Campus, University of Wollongong, Squires Way, North Wollongong 2522, Australia.

ORCID-Profile: Chao Wang, Zhenxiang Cheng, Jianli Wang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Peng, P., Wang, C., Cui, S., Wang, C., Chen, J., Hao, M., Huang, X., Wang, X., Wang, Y., Cheng, Z., & Wang, J. (2023). Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSb 2 Se 4. ACS Applied Materials & Interfaces, 15(38), 45016-45025. https://doi.org/10.1021/acsami.3c09995

Vancouver

Peng P, Wang C, Cui S, Wang C, Chen J, Hao M, et al. Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSb 2 Se 4. ACS Applied Materials & Interfaces. 2023;15(38):45016-45025. doi:10.1021/acsami.3c09995

BibTeX
@article{Peng2023,
  author = {Peng, Panpan and Wang, Chao and Cui, Shengqiang and Wang, Chunhui and Chen, Jing and Hao, Min and Huang, Xudong and Wang, Xinxin and Wang, Yajing and Cheng, Zhenxiang and Wang, Jianli},
  title = {Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSb 2 Se 4},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {38},
  pages = {45016--45025},
  doi = {10.1021/acsami.3c09995}
}
Kostenlos starten →