Oxygen Electrode PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ with Different Composite Proportions for Proton-Conducting Solid Oxide Electrolysis Cells
ACS Applied Materials & Interfaces · 16.08.2023 · 15 (32) · 38581-38591
DOI: 10.1021/acsami.3c07638 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 03.08.2023. Verfasst von Hu Bai und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Nanjing University of Science and Technology, 200 Xiaolingwei Street, Jiangsu Province 210094, China. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Natural Science Foundation of Jiangsu Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Proton-conducting solid oxide electrolysis cell (H-SOEC), as a hydrogen production device using proton conductor oxides as an electrolyte, has gained attention due to its various advantages of being more suitable for operating conditions at intermediate and low temperatures. However, its commercialization urgently needs to address the issue of insufficient catalytic activity of the oxygen electrode at lower temperatures. In this work, PrBa0.5Sr0.5Co1.5Fe0.5O5+δ-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (PBSCF-BZCYYb) series composite materials (denoted as PBSCF-BZCYYb46, PBSCF- BZCYYb55, and PBSCF-BZCYYb64 based on the mass ratios of PBSCF and BZCYYb as 4:6, 5:5, and 6:4, respectively) are prepared and applied as oxygen electrodes for H-SOECs. The H-SOECs with the structure of PBSCF-BZCYYb|BZCYYb|NiO-BZCYYb (active layer)|NiO-BZCYYb (support layer) are prepared and recorded as Cell 1, Cell 2, and Cell 3 with PBSCF-BZCYYb46, PBSCF-BZCYYb55, and PBSCF-BZCYYb64 as oxygen electrodes. The H-SOECs exhibit electrolysis current densities of 669.00, 743.80, and 503.30 mA cm-2 under 1.3 V at 650 °C, respectively. The cells also show considerable stability in the constant voltage electrolysis of 179.5, 152.8, and 83.0 h, respectively. Through the comparison of various electrochemical properties, PBSCF-BZCYYb55 is considered the most promising oxygen electrode material in this work.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Energy and Power Engineering, Nanjing University of Science and Technology, 200 Xiaolingwei Street, Jiangsu Province 210094, China.
ORCID-Profile: Juan Zhou
Förderung
- Natural Science Foundation of Jiangsu Province
- National Natural Science Foundation of China
Zitieren
APA
Bai, H., Zhang, Y., Chu, J., Zhou, Q., Lan, H., & Zhou, J. (2023). Oxygen Electrode PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ with Different Composite Proportions for Proton-Conducting Solid Oxide Electrolysis Cells. ACS Applied Materials & Interfaces, 15(32), 38581-38591. https://doi.org/10.1021/acsami.3c07638
Vancouver
Bai H, Zhang Y, Chu J, Zhou Q, Lan H, Zhou J. Oxygen Electrode PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ with Different Composite Proportions for Proton-Conducting Solid Oxide Electrolysis Cells. ACS Applied Materials & Interfaces. 2023;15(32):38581-38591. doi:10.1021/acsami.3c07638
BibTeX
@article{Bai2023,
author = {Bai, Hu and Zhang, Yanhong and Chu, Jiaming and Zhou, Qi and Lan, Haiyang and Zhou, Juan},
title = {Oxygen Electrode PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ –BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ with Different Composite Proportions for Proton-Conducting Solid Oxide Electrolysis Cells},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {32},
pages = {38581--38591},
doi = {10.1021/acsami.3c07638}
}
EUVIMED