Improved Antibacterial Properties of Polylactic Acid-Based Nanofibers Loaded with ZnO–Ag Nanoparticles through Pore Engineering
ACS Applied Materials & Interfaces · 13.09.2023 · 15 (36) · 42920-42929
DOI: 10.1021/acsami.3c06791 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 31.08.2023. Verfasst von Xiaolong Su und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Sha…. Hauptthemen laut MEDLINE: Nanofibers, Zinc Oxide, Nanoparticles. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
In the post-epidemic era, bio-based protective fiber materials with active protective functions are of utmost importance, not only to combat the spread of pathogens but also to reduce the environmental impact of petroleum-based protective materials. Here, efficient antibacterial polylactic acid-based (PLA-based) fibers are prepared by solution blow spinning and their pore structures are regulated by controlling the ratio of the solvent components in the spinning solutions. The porous PLA-based fibers exhibit antibacterial efficiencies of over 99% against Escherichia coli and over 98% against Bacillus subtilis, which are significantly higher than that of the nonporous PLA-based fibers. The excellent antibacterial property of the porous PLA-based fibers can be attributed to their high porosity, which allows antibacterial nanoparticles to be released more easily from the fibers, thus effectively killing pathogenic microorganisms. Moreover, pore structure regulation can also enhance the mechanical property of the PLA-based fiber materials. Our approach of regulating the microstructure and properties of the PLA-based fibers through pore engineering can be extended to other polymer fiber materials and is suitable for polymer-based composite systems that require optimal performance through sufficient exposure of doped materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
ORCID-Profile: Chao Jia, Hengxue Xiang
Förderung
- National Key Research and Development Program of China
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- Innovation and Development Support Plan for Key Industries in Southern Xinjiang
Zitieren
APA
Su, X., Zhai, Y., Jia, C., Xu, Z., Luo, D., Pan, Z., Xiang, H., Yu, S., Zhu, L., & Zhu, M. (2023). Improved Antibacterial Properties of Polylactic Acid-Based Nanofibers Loaded with ZnO–Ag Nanoparticles through Pore Engineering. ACS Applied Materials & Interfaces, 15(36), 42920-42929. https://doi.org/10.1021/acsami.3c06791
Vancouver
Su X, Zhai Y, Jia C, Xu Z, Luo D, Pan Z, et al. Improved Antibacterial Properties of Polylactic Acid-Based Nanofibers Loaded with ZnO–Ag Nanoparticles through Pore Engineering. ACS Applied Materials & Interfaces. 2023;15(36):42920-42929. doi:10.1021/acsami.3c06791
BibTeX
@article{Su2023,
author = {Su, Xiaolong and Zhai, Yaling and Jia, Chao and Xu, Zhe and Luo, Dianfeng and Pan, Zhiyi and Xiang, Hengxue and Yu, Senlong and Zhu, Liping and Zhu, Meifang},
title = {Improved Antibacterial Properties of Polylactic Acid-Based Nanofibers Loaded with ZnO–Ag Nanoparticles through Pore Engineering},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {36},
pages = {42920--42929},
doi = {10.1021/acsami.3c06791}
}
EUVIMED