EUVIMEDEUVIMED entdecken
Crossref

Influence of Interfering Ions and Adsorption Temperature on Radioactive Iodine Removal Efficiency and Stability of Ni-MOF-74 and Zr-UiO-66

Turki Alghamdi, Peter O Aina, Ali A Rownaghi iD, Fateme Rezaei iD

ACS Applied Materials & Interfaces · 19.07.2023 · 15 (28) · 33621-33632

DOI: 10.1021/acsami.3c05821 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 07.07.2023. Verfasst von Turki Alghamdi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Linda and Bipin Doshi Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, Rolla, Missouri 65409-1230, …. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: Division of Chemical, Bioengineering, Environmental, and Transport Systems, Ministry of Education - Kingdom of Saudi Arabi.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal-organic frameworks (MOFs) often exhibit an exceptional adsorption-based separation performance for a variety of gases, ions, and liquids. While most radioactive iodine removal studies focus on the capture of radioactive iodine from off-gas streams, few studies have systematically investigated the effect of structure-property relationships of MOFs on iodine removal performance in the presence of interfering ions in liquid solutions. Herein, we investigated the iodide ion (I-) adsorption performance of two model MOFs (e.g., Ni-MOF-74 and Zr-UiO-66) in liquid phase as a function of iodine concentration (e.g., 0.125 to 0.25 and 0.50 mmol/L) and adsorption temperature (e.g., 25 to 40 and 60 °C), and in the presence of interfering ions such as Cl- and CO32- through batch-mode experiments. Under identical experimental conditions, Ni-MOF-74 outperformed Zr-UiO-66 in immobilizing iodine from the solution by achieving a maximum iodine removal efficiency of 97% at 60 °C. The results showed that the presence of other interfering ions marginally affects the iodine removal efficiency (e.g., capacity and rate of iodine capture) over both MOF adsorbents. The adsorption kinetics was found to be controlled by multiple transport processes encompassing external surface adsorption, intraparticle diffusion, and final equilibrium. Moreover, the leach test results revealed 8 and 12% iodine release from Ni-MOF-74 and Zr-UiO-66, respectively, at 25 °C after 48 h aging. This study establishes guiding principles for sustainable removal of iodine in the presence of Cl- and CO32- species in cyclohexane.

Schlagwörter

Stichwörter der Autor:innen

Ni-MOF-74Zr-UiO-66adsorptioncyclohexaneinterfering ionsiodine capture

Autor:innen und Institutionen

  • Linda and Bipin Doshi Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, Rolla, Missouri 65409-1230, United States.
  • Department of Chemistry, Cleveland State University, 2121 Euclid Ave., Cleveland, Ohio 44115, United States.

ORCID-Profile: Ali A Rownaghi, Fateme Rezaei

Förderung

  • Division of Chemical, Bioengineering, Environmental, and Transport Systems
  • Ministry of Education - Kingdom of Saudi Arabi

Zitieren

APA

Alghamdi, T., Aina, P. O., Rownaghi, A. A., & Rezaei, F. (2023). Influence of Interfering Ions and Adsorption Temperature on Radioactive Iodine Removal Efficiency and Stability of Ni-MOF-74 and Zr-UiO-66. ACS Applied Materials & Interfaces, 15(28), 33621-33632. https://doi.org/10.1021/acsami.3c05821

Vancouver

Alghamdi T, Aina PO, Rownaghi AA, Rezaei F. Influence of Interfering Ions and Adsorption Temperature on Radioactive Iodine Removal Efficiency and Stability of Ni-MOF-74 and Zr-UiO-66. ACS Applied Materials & Interfaces. 2023;15(28):33621-33632. doi:10.1021/acsami.3c05821

BibTeX
@article{Alghamdi2023,
  author = {Alghamdi, Turki and Aina, Peter O and Rownaghi, Ali A and Rezaei, Fateme},
  title = {Influence of Interfering Ions and Adsorption Temperature on Radioactive Iodine Removal Efficiency and Stability of Ni-MOF-74 and Zr-UiO-66},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {28},
  pages = {33621--33632},
  doi = {10.1021/acsami.3c05821}
}
Kostenlos starten →