EUVIMEDEUVIMED entdecken
Crossref

Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing

Omar Kassem iD, Vincent Barnier, Mohamed Nasreldin, Jawad Reslan, Asdin Aoufi, Aravindnarain Ravichandran, Sergio Sao-Joao, Khalid Hoummada, Ahmed Charai, Mathilde Rieu, Jean-Paul Viricelle, Thierry Djenizian und 1 weitere

ACS Applied Materials & Interfaces · 28.06.2023 · 15 (25) · 30663-30673

DOI: 10.1021/acsami.3c05015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 15.06.2023. Verfasst von Omar Kassem und 12 weiteren Autor:innen. Beteiligte Einrichtung: Center of Microelectronics in Provence, Department of Flexible Electronics, Mines Saint-Etienne, F-13541 Gardanne, France. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 58 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Printing graphene-based nanomaterials on flexible substrates has become a burgeoning platform for next-generation technologies. Combining graphene and nanoparticles to create hybrid nanomaterials has been proven to boost device performance, thanks to their complementary physical and chemical properties. However, high growth temperatures and long processing times are often required to produce high-quality graphene-based nanocomposites. For the first time, we report a novel scalable approach for additive manufacturing of Sn patterns on polymer foil and their selective conversion into nanocomposite films under atmospheric conditions. A combination of inkjet printing and intense flashlight irradiation techniques is studied. Light pulses that are selectively absorbed by the printed Sn patterns cause a temperature of over 1000 °C to be reached locally in a split second without damaging the underlying polymer foil. The top surface of the polymer foil at the interface with printed Sn becomes locally graphitized and acts as a carbon source, transforming printed Sn into Sn@graphene (Sn@G) core-shell patterns. Our results revealed a decrease in electrical sheet resistance, with an optimal value (Rs = 72 ± 2 Ω/sq) reached when light pulses with an energy density of 12.8 J/cm2 were applied. These graphene-protected Sn nanoparticle patterns exhibit excellent resistance against air oxidation for months. Finally, we demonstrate the implementation of Sn@G patterns as electrodes for Li-ion microbatteries (LIBs) and triboelectric nanogenerators (TENGs), showing remarkable performance. This work offers new insight into the development of a versatile, eco-friendly, and cost-effective technique for producing well-defined patterns of graphene-based nanomaterials directly on a flexible substrate using different light-absorbing nanoparticles and carbon sources.

Schlagwörter

Stichwörter der Autor:innen

Sn nanoparticlescore−shell nanostructureflexible substrategrapheneinkjet printingintense pulse lightlithium-ion batterytriboelectric nanogenerator

Autor:innen und Institutionen

  • Center of Microelectronics in Provence, Department of Flexible Electronics, Mines Saint-Etienne, F-13541 Gardanne, France.
  • Mines Saint-Etienne, Université de Lyon, CNRS, UMR 5307 LGF, Centre SPIN, F-42023 Saint-Etienne, France.
  • IM2NP, Faculté des Sciences de Saint-Jérôme Case 142, Aix-Marseille University/CNRS, 13397 Marseille, France.
  • Center of Physical-Chemical Methods of Research and Analysis, Al-Farabi Kazakh National University, Tole Bi Street, 96A., 050040 Almaty, Kazakhstan.

ORCID-Profile: Omar Kassem, Saadaoui Mohamed

Zitieren

APA

Kassem, O., Barnier, V., Nasreldin, M., Reslan, J., Aoufi, A., Ravichandran, A., Sao-Joao, S., Hoummada, K., Charai, A., Rieu, M., Viricelle, J. P., Djenizian, T., & Mohamed, S. (2023). Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing. ACS Applied Materials & Interfaces, 15(25), 30663-30673. https://doi.org/10.1021/acsami.3c05015

Vancouver

Kassem O, Barnier V, Nasreldin M, Reslan J, Aoufi A, Ravichandran A, et al. Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing. ACS Applied Materials & Interfaces. 2023;15(25):30663-30673. doi:10.1021/acsami.3c05015

BibTeX
@article{Kassem2023,
  author = {Kassem, Omar and Barnier, Vincent and Nasreldin, Mohamed and Reslan, Jawad and Aoufi, Asdin and Ravichandran, Aravindnarain and Sao-Joao, Sergio and Hoummada, Khalid and Charai, Ahmed and Rieu, Mathilde and Viricelle, Jean-Paul and Djenizian, Thierry and Mohamed, Saadaoui},
  title = {Selective Growth of Graphene-Confined Inkjet-Printed Sn Nanoparticles on Plastic Using Intense Pulsed Light Annealing},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {25},
  pages = {30663--30673},
  doi = {10.1021/acsami.3c05015}
}
Kostenlos starten →