Polysulfide Rejection Strategy in Lithium–Sulfur Batteries Using an Ion-Conducting Gel-Polymer Interlayer Membrane
ACS Applied Materials & Interfaces · 19.07.2023 · 15 (28) · 33957-33971
DOI: 10.1021/acsami.3c02800 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.07.2023. Verfasst von Rupesh K Tiwari und 5 weiteren Autor:innen. Beteiligte Einrichtung: Ionic Liquid and Solid-State Ionics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005, India. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: Banaras Hindu University, Science and Engineering Research Board.
Abstract (Originalsprache)
Lithium-sulfur batteries (LiSBs) are emerging as promising alternative to conventional secondary lithium-ion batteries (LiBs) due to their high energy density, low cost, and environmental friendliness. However, preventing polysulfide dissolution is a great challenge for their commercial viability. The present work is focused on preparing a lithium salt and ionic liquid (IL) solution (SIL) impregnated ion (lithium ion)-conducting gel-polymer membrane (IC-GPM) interlayer to prevent polysulfide migration toward the anode by using an electrostatic rejection and trapping strategy. Herein, we introduce an SIL-based freestanding optimized IC-GPM70 (70 wt % SIL) interlayer membrane with high lithium-ion conductivity (2.58 × 10-3 S cm-1) along with excellent thermal stability to suppress the migration of polysulfide toward the anode and prevent polysulfide dissolution in the electrolyte. Because of the coulombic interaction, the anionic groups, -CF2 of the β-phase polymer host PVdF-HFP, TFSI- anion of IL EMIMTFSI, and anion BOB- of LIBOB salt, allow hopping of positively charged lithium ions (Li+) but reject negatively charged and relatively large-sized polysulfide anions (Sx-2, 4
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Ionic Liquid and Solid-State Ionics Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi 221005, India.
ORCID-Profile: Rajendra K Singh
Förderung
- Banaras Hindu University
- Science and Engineering Research Board
Zitieren
APA
Tiwari, R. K., Mishra, R., Patel, A., Tiwari, A., Meghnani, D., & Singh, R. K. (2023). Polysulfide Rejection Strategy in Lithium–Sulfur Batteries Using an Ion-Conducting Gel-Polymer Interlayer Membrane. ACS Applied Materials & Interfaces, 15(28), 33957-33971. https://doi.org/10.1021/acsami.3c02800
Vancouver
Tiwari RK, Mishra R, Patel A, Tiwari A, Meghnani D, Singh RK. Polysulfide Rejection Strategy in Lithium–Sulfur Batteries Using an Ion-Conducting Gel-Polymer Interlayer Membrane. ACS Applied Materials & Interfaces. 2023;15(28):33957-33971. doi:10.1021/acsami.3c02800
BibTeX
@article{Tiwari2023,
author = {Tiwari, Rupesh K and Mishra, Raghvendra and Patel, Anupam and Tiwari, Anurag and Meghnani, Dipika and Singh, Rajendra K},
title = {Polysulfide Rejection Strategy in Lithium–Sulfur Batteries Using an Ion-Conducting Gel-Polymer Interlayer Membrane},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {28},
pages = {33957--33971},
doi = {10.1021/acsami.3c02800}
}
EUVIMED