EUVIMEDEUVIMED entdecken
Crossref

Achieving Good Bonding Strength of the Cu Layer on PET Films by Pretreatment of a Mixed Plasma of Carbon and Copper

Yue Li, Yongxin Wang iD, Ying Wang iD, Yutao Wu

ACS Applied Materials & Interfaces · 08.03.2023 · 15 (9) · 12590-12602

DOI: 10.1021/acsami.2c23144 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 27.02.2023. Verfasst von Yue Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Marine New Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protection Technology, Ningbo Institut…. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Science and Technology Department of Zhejiang Province, National Natural Science Foundation of China, Science and Technology Service Network Initiative Chinese academy of Sciences-Dongguan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu layers were fabricated on PET films with and without pretreatment by a mixed plasma composed of carbon and copper using a magnetron sputtering technique for potential application as the flexible copper-clad laminate (FCCL) in 5G technology. In order to evaluate the effect of carbon plasma on the composited layer, the graphite target current was adjusted from 0.5 to 2.0 A. The microstructures and properties of Cu layers on PET films with different treatments were measured by an X-ray powder diffractometer, X-ray photoelectron spectroscope, Raman spectroscope, scanning electron microscope, transmission electron microscope, scratching test, indentation test, and four-probe detector. The results showed that the organic polymer carbon structure on the surface of PET films was changed to inorganic amorphous carbon due to the effect of the carbon plasma. At the same time, the active free radicals formed in the transition process react with metal copper ions to form organometallic compounds. Under the treatment of a mixed plasma of carbon and copper, the C/Cu mixed layer was formed on the PET film at the top of the substrate. Due to the presence of C/Cu mixed interlayers, the bonding strengths between the final Cu layers and the PET film substrates were improved, and the strongest bonding strength appeared when the graphite target current was 1.0 A. In addition, the presence of the C/Cu mixed interlayer enhanced the toughness of the Cu layer on PET film. It was proposed that the good bonding strength in combination and the enhanced toughness for the Cu layer on a PET film was due to the formation of a C/Cu mixed interlayer induced by the pretreatment of a mixed plasma of carbon and copper.

Schlagwörter

Stichwörter der Autor:innen

C/Cu layerPET filmbonding strengthcopper-clad plateflexibilitypretreatment

Autor:innen und Institutionen

  • Key Laboratory of Marine New Materials and Related Technology, Zhejiang Key Laboratory of Marine Materials and Protection Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences…
  • School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center for Photovoltic Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Techno…
  • University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID-Profile: Yongxin Wang, Ying Wang

Förderung

  • Science and Technology Department of Zhejiang Province
  • National Natural Science Foundation of China
  • Science and Technology Service Network Initiative Chinese academy of Sciences-Dongguan
  • Changzhou science and technology support plan

Zitieren

APA

Li, Y., Wang, Y., Wang, Y., & Wu, Y. (2023). Achieving Good Bonding Strength of the Cu Layer on PET Films by Pretreatment of a Mixed Plasma of Carbon and Copper. ACS Applied Materials & Interfaces, 15(9), 12590-12602. https://doi.org/10.1021/acsami.2c23144

Vancouver

Li Y, Wang Y, Wang Y, Wu Y. Achieving Good Bonding Strength of the Cu Layer on PET Films by Pretreatment of a Mixed Plasma of Carbon and Copper. ACS Applied Materials & Interfaces. 2023;15(9):12590-12602. doi:10.1021/acsami.2c23144

BibTeX
@article{Li2023,
  author = {Li, Yue and Wang, Yongxin and Wang, Ying and Wu, Yutao},
  title = {Achieving Good Bonding Strength of the Cu Layer on PET Films by Pretreatment of a Mixed Plasma of Carbon and Copper},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {12590--12602},
  doi = {10.1021/acsami.2c23144}
}
Kostenlos starten →