Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers
ACS Applied Materials & Interfaces · 01.02.2023 · 15 (4) · 5701-5708
DOI: 10.1021/acsami.2c21518 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 20.01.2023. Verfasst von Lijun Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Graphene Institute (BGI), Beijing 100095, P. R. China. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: Ministry of Science and Technology of the People's Republic of China, Natural Science Foundation of Beijing Municipality, National Natural Science Foundation of China.
Abstract (Originalsprache)
Carbon nanotubes (CNTs) are promising building blocks for the fabrication of novel fibers with structural and functional properties. However, the mechanical and electrical performances of carbon nanotube fibers (CNTFs) are far lower than the intrinsic properties of individual CNTs. Exploring methods for the controllable assembly and continuous preparation of high-performance CNTFs is still challenging. Herein, a graphene/chlorosulfonic acid-assisted wet-stretching method is developed to produce highly densified and well-aligned graphene/carbon nanotube fibers (G/CNTFs) with excellent mechanical and electrical performances. Graphene with small size and high quality can bridge the adjacent CNTs to avoid the interfacial slippage under deformation, which facilitates the formation of a robust architecture with abundant conductive pathways. Their ordered structure and enhanced interfacial interactions endow the fibers with both high strength (4.7 GPa) and high electrical conductivity (more than 2 × 106 S/m). G/CNTF-based lightweight wires show good flexibility and knittability, and the high-performance fiber heaters exhibit ultrafast electrothermal response over 1000 °C/s and a low operation voltage of 3 V. This method paves the way for optimizing the microstructures and producing high-strength and high-conductivity CNTFs, which are promising candidates for the high-value fiber-based applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Beijing Graphene Institute (BGI), Beijing 100095, P. R. China.
- State Key Laboratory of High-Efficiency Coal Utilization and Green Chemical Engineering, College of Chemistry and Chemical Engineering, Ningxia University, Yinchuan 750021, P. R. China.
- Center for Nanochemistry, Beijing Science and Engineering Center for Nanocarbons, Beijing National Laboratory for Molecular Sciences, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871, P.…
- School of Materials Science and Engineering, Peking University, Beijing 100871, P. R. China.
ORCID-Profile: Jin Zhang
Förderung
- Ministry of Science and Technology of the People's Republic of China
- Natural Science Foundation of Beijing Municipality
- National Natural Science Foundation of China
- Chinese Academy of Sciences
- Beijing National Laboratory for Molecular Sciences
Zitieren
APA
Li, L., Sun, T., Lu, S., Chen, Z., Xu, S., Jian, M., & Zhang, J. (2023). Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers. ACS Applied Materials & Interfaces, 15(4), 5701-5708. https://doi.org/10.1021/acsami.2c21518
Vancouver
Li L, Sun T, Lu S, Chen Z, Xu S, Jian M, et al. Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers. ACS Applied Materials & Interfaces. 2023;15(4):5701-5708. doi:10.1021/acsami.2c21518
BibTeX
@article{Li2023,
author = {Li, Lijun and Sun, Tongzhao and Lu, Shichao and Chen, Zhuo and Xu, Shichen and Jian, Muqiang and Zhang, Jin},
title = {Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {4},
pages = {5701--5708},
doi = {10.1021/acsami.2c21518}
}
EUVIMED