Balancing Processability and Tribological Performance of UHMWPE/HDPE Composites via KH570-Functionalized Nano-SiO2 Reinforcement
ACS Applied Engineering Materials · 29.10.2026
DOI: 10.1021/acsaenm.6c01053 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 29.10.2026. Verfasst von Xinyi Dai und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Gefördert von: Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
Water-lubricated bearings require polymer composites with low friction, high wear resistance, and favorable processability under boundary and mixed lubrication, however, simultaneously achieving these characteristics is still challenging. Ultra-high molecular weight polyethylene (UHMWPE) shows excellent tribological performance, whereas its exceedingly poor melt processability limits practical fabrication. Blending UHMWPE with HDPE can enhance processability, but it often comes at the expense of wear resistance. To overcome this trade-off, KH570-modified nano-SiO2 was mixed with UHMWPE/HDPE (20/80) composites through melt blending followed by hot pressing. The impact of SiO2 content on crystallization performance, mechanical characteristics, rheological response, melt flow rate, and tribological performance was systematically investigated. The composite containing 0.4 wt % SiO2 exhibited the best overall performance. Under dry sliding conditions, it achieved a minimum coefficient of friction (COF) of 0.05 and a wear rate of 0.82 × 10−5 mm3/(N·m). Under seawater lubrication, the minimum COF was 0.07, with a wear rate of 1.03 × 10−5 mm3/(N·m). Compared with pure UHMWPE, the composite showed a 16% reduction in wear rate under dry sliding, although its wear rate increased slightly under seawater lubrication. The composite containing 0.4 wt % SiO2 achieved the optimally overall performance, with a minimum friction coefficient of 0.05 and a wear rate of 0.82 × 10−5 mm3/(N·m), representing a 16% reduction in wear rate relative to neat UHMWPE, while also boosting processability. These improvements are ascribed to the even dispersion of nanoparticles, enhanced interfacial adhesion, and the creation of a more robust transfer film. Overall, this study offers a practical strategy for balancing processability and tribological performance in polyethylene-based composites and provides useful guidance for developing wear-resistant materials for water-lubricated bearing applications.
Förderung
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Dai, X., Song, H., Liu, M., Ma, X., Zhou, Q., Sui, Y., & Wei, P. (2026). Balancing Processability and Tribological Performance of UHMWPE/HDPE Composites via KH570-Functionalized Nano-SiO2 Reinforcement. ACS Applied Engineering Materials. https://doi.org/10.1021/acsaenm.6c01053
Vancouver
Dai X, Song H, Liu M, Ma X, Zhou Q, Sui Y, et al. Balancing Processability and Tribological Performance of UHMWPE/HDPE Composites via KH570-Functionalized Nano-SiO2 Reinforcement. ACS Applied Engineering Materials. 2026. doi:10.1021/acsaenm.6c01053
BibTeX
@article{Dai2026,
author = {Dai, Xinyi and Song, Hongjie and Liu, Mengjiao and Ma, Xiaoya and Zhou, Qiong and Sui, Yang and Wei, Peng},
title = {Balancing Processability and Tribological Performance of UHMWPE/HDPE Composites via KH570-Functionalized Nano-SiO2 Reinforcement},
journal = {ACS Applied Engineering Materials},
year = {2026},
doi = {10.1021/acsaenm.6c01053}
}
EUVIMED