Defect-Free Imprinting of Enclosed Microstructures and Dense Pillar Arrays by Vacuum-Assisted Degassing in Ormocer Resists: Process Optimization and Demonstration for Microfluidic Devices
ACS Applied Engineering Materials · 10.11.2026
DOI: 10.1021/acsaenm.6c00981 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 10.11.2026. Verfasst von Nilüfer Tasli und 6 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Hans und Ria Messer Stiftung.
Abstract (Originalsprache)
The direct imprinting of enclosed microstructures such as dense pillar arrays is limited by air entrapment within stamp cavities, which prevents complete filling and leads to defective structure formation. Here, we present a systematic investigation of vacuum-assisted imprinting as a strategy to overcome this limitation, using OrmoStamp working stamps to replicate arrays of micropillars with 20 μm diameter, 27 μm height, and 38 μm pitch into UV curable resists from the Ormocer family. By degassing the stamp-polymer assembly inside a desiccator under controlled vacuum prior to UV curing, air entrapment is effectively eliminated. Three degassing conditions are compareda strong pump, a weak pump, and passive degassing at ambient pressurealongside two curing protocols: ambient-cure and in situ vacuum-pressure. With passive degassing at ambient conditions, we obtain ∼85% of fully imprinted pillars in the array after 60 min. In contrast, with a strong pump, we achieve 100% pillar yield after just 10 min of degassing. The optimized process is demonstrated across three materialsOrmoStamp, Ormocomp, and the fluorine-free OrmoStamp FF. Qualitative evidence suggests that air removal proceeds primarily via bubble migration from the cavities. The practical impact of the optimization is demonstrated through two functional microfluidic applications: a deterministic lateral displacement device for micro-particle separation, and a chip with U-shaped hydrodynamic traps for particle capture, both of which require defect-free microstructures for functional operation.
Förderung
- Deutsche Forschungsgemeinschaft
- Hans und Ria Messer Stiftung
Zitieren
APA
Tasli, N., Drescher, E., Atrian-Garcia, H., Lacroix, L. V., Erichlandwehr, T., Tiwari, S., & Fernandez-Cuesta, I. (2026). Defect-Free Imprinting of Enclosed Microstructures and Dense Pillar Arrays by Vacuum-Assisted Degassing in Ormocer Resists: Process Optimization and Demonstration for Microfluidic Devices. ACS Applied Engineering Materials. https://doi.org/10.1021/acsaenm.6c00981
Vancouver
Tasli N, Drescher E, Atrian-Garcia H, Lacroix LV, Erichlandwehr T, Tiwari S, et al. Defect-Free Imprinting of Enclosed Microstructures and Dense Pillar Arrays by Vacuum-Assisted Degassing in Ormocer Resists: Process Optimization and Demonstration for Microfluidic Devices. ACS Applied Engineering Materials. 2026. doi:10.1021/acsaenm.6c00981
BibTeX
@article{Tasli2026,
author = {Tasli, Nilüfer and Drescher, Emilia and Atrian-Garcia, Herbert and Lacroix, Louise von and Erichlandwehr, Tim and Tiwari, Sadhana and Fernandez-Cuesta, Irene},
title = {Defect-Free Imprinting of Enclosed Microstructures and Dense Pillar Arrays by Vacuum-Assisted Degassing in Ormocer Resists: Process Optimization and Demonstration for Microfluidic Devices},
journal = {ACS Applied Engineering Materials},
year = {2026},
doi = {10.1021/acsaenm.6c00981}
}
EUVIMED