EUVIMEDEUVIMED entdecken
Crossref

Controlling Semi-Crystallinity in P3HT for Efficient Perovskite Solar Cells and Low-Power Applications

Anil Kumar Chauhan, Veerender Putta, Jaspreet Singh, Sridevi Chandran, Purushottam Jha, Shankar Prasad Koiry

ACS Applied Engineering Materials · 14.11.2026

DOI: 10.1021/acsaenm.6c00391 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 14.11.2026. Verfasst von Anil Kumar Chauhan und 5 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(3-hexylthiophene) (P3HT) is a promising low-cost, hole-transport material for stable, scalable perovskite solar cells (PSCs). However, the performance of P3HT-based PSCs is often limited by suboptimal charge transport associated with disordered molecular aggregation and packing in solution-processed P3HT films. Here, we demonstrate a solvent-controlled strategy to regulate the molecular ordering and morphology of P3HT in MAPbI3-based PSCs. Chloroform and dichlorobenzene (DCB), selected for their different boiling points and evaporation rates, are combined to tune solvent evaporation during P3HT film formation. The optimized CHCl3/DCB (4:1) blend produces a compact, ordered film with reduced crystallite misorientation, yielding a champion PCE of 17.1% without additional interfacial passivation or modification of the P3HT hole-transport layer. The optimized processing conditions were also used to fabricate PSC modules with active areas up to 36 cm2. Under outdoor sunlight, a 36 cm2 module delivered an output power of approximately 0.1 W, while module-scale devices powered commercial low-power electronics under indoor illumination. Long-term ambient dark-storage measurements showed retention of ∼80% of the initial PCE after one year using a simple paraffin−acrylic encapsulation strategy. These results demonstrate that solvent-controlled molecular ordering and film morphology in P3HT influence photovoltaic performance and that this approach can be extended to larger-area PSC module fabrication for practical low-power energy-harvesting applications.

Zitieren

APA

Chauhan, A. K., Putta, V., Singh, J., Chandran, S., Jha, P., & Koiry, S. P. (2026). Controlling Semi-Crystallinity in P3HT for Efficient Perovskite Solar Cells and Low-Power Applications. ACS Applied Engineering Materials. https://doi.org/10.1021/acsaenm.6c00391

Vancouver

Chauhan AK, Putta V, Singh J, Chandran S, Jha P, Koiry SP. Controlling Semi-Crystallinity in P3HT for Efficient Perovskite Solar Cells and Low-Power Applications. ACS Applied Engineering Materials. 2026. doi:10.1021/acsaenm.6c00391

BibTeX
@article{Chauhan2026,
  author = {Chauhan, Anil Kumar and Putta, Veerender and Singh, Jaspreet and Chandran, Sridevi and Jha, Purushottam and Koiry, Shankar Prasad},
  title = {Controlling Semi-Crystallinity in P3HT for Efficient Perovskite Solar Cells and Low-Power Applications},
  journal = {ACS Applied Engineering Materials},
  year = {2026},
  doi = {10.1021/acsaenm.6c00391}
}
Kostenlos starten →