EUVIMEDEUVIMED entdecken
Crossref

Interfacial Electronic Modulation in MXene–COF Nanostructures for Reversible Room-Temperature Hydrogen Sensing

Sujith Benarzee Nallamalla, Natarajan Pradeep, Parameswari Akshinthala, Chandan Kumar Maity, Sayan Chaudhuri, Prasantha R. Mudimela, Surendra Babu Manabolu Surya

ACS Applied Engineering Materials · 26.06.2026 · 4 (6) · 3321-3338

DOI: 10.1021/acsaenm.6c00385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 26.05.2026. Verfasst von Sujith Benarzee Nallamalla und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: Department of Science and Technology, Ministry of Science and Technology, India, CIF, GITAM Deemed to be University, SAIF, DST-supported Institute NMR Facility at IISc Bangalore.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Real-time hydrogen detection under ambient and portable conditions is often hindered by the inherent trade-off between strong adsorption for sensitivity and weak interaction for rapid reversibility in porous semiconductor materials. In this work, a redox-active anthraquinone-based covalent–organic framework (DAAQ-COF) interfaced with conductive Ti3C2 MXene enables enhanced interfacial charge transfer, simultaneously modulating hydrogen adsorption across the large accessible surface area. The optimized DAAQ@Ti3C2-50 flexible sensor detects hydrogen (1 ppm) at room temperature, exhibiting response (Tres) and recovery times (Trec) of 29 and 18 s, respectively, with ∼99.9% signal reversibility. Stable sensing behavior is preserved under high bending deformation (97.45°; 85/87 s; 99.9%) and at 150 °C (74/88 s; 99.5% recovery), indicating structural integrity and sustained electronic interactions under mechanical and thermal stress. Density functional theory calculations reveal weak H2 physisorption on pristine DAAQ-COF (−0.051 eV) and strong chemisorption on Ti3C2 (−1.91 eV), whereas the heterointerface promotes optimized hydrogen adsorption accompanied by charge redistribution. These results establish interfacial-modulation adsorption as a viable route toward high-sensitivity yet fully reversible hydrogen sensing platforms.

Förderung

  • Department of Science and Technology, Ministry of Science and Technology, India
  • CIF, GITAM Deemed to be University
  • SAIF, DST-supported Institute NMR Facility at IISc Bangalore

Zitieren

APA

Nallamalla, S. B., Pradeep, N., Akshinthala, P., Maity, C. K., Chaudhuri, S., Mudimela, P. R., & Surya, S. B. M. (2026). Interfacial Electronic Modulation in MXene–COF Nanostructures for Reversible Room-Temperature Hydrogen Sensing. ACS Applied Engineering Materials, 4(6), 3321-3338. https://doi.org/10.1021/acsaenm.6c00385

Vancouver

Nallamalla SB, Pradeep N, Akshinthala P, Maity CK, Chaudhuri S, Mudimela PR, et al. Interfacial Electronic Modulation in MXene–COF Nanostructures for Reversible Room-Temperature Hydrogen Sensing. ACS Applied Engineering Materials. 2026;4(6):3321-3338. doi:10.1021/acsaenm.6c00385

BibTeX
@article{Nallamalla2026,
  author = {Nallamalla, Sujith Benarzee and Pradeep, Natarajan and Akshinthala, Parameswari and Maity, Chandan Kumar and Chaudhuri, Sayan and Mudimela, Prasantha R. and Surya, Surendra Babu Manabolu},
  title = {Interfacial Electronic Modulation in MXene–COF Nanostructures for Reversible Room-Temperature Hydrogen Sensing},
  journal = {ACS Applied Engineering Materials},
  year = {2026},
  volume = {4},
  number = {6},
  pages = {3321--3338},
  doi = {10.1021/acsaenm.6c00385}
}
Kostenlos starten →