Covalently Bonded Electrochemical Interfaces for Flexible Aluminum–Graphite Electrodes
ACS Applied Engineering Materials · 26.06.2026 · 4 (6) · 3018-3027
DOI: 10.1021/acsaenm.6c00296 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 20.05.2026. Verfasst von Harini Srikant und 10 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Gefördert von: University of Illinois at Urbana-Champaign, European Commission, Hebrew University of Jerusalem.
Abstract (Originalsprache)
Flexible electronic systems require energy-dense batteries that can tolerate repeated mechanical deformation without loss of electrochemical performance. Conventional flexible battery architectures typically rely on weakly bound electrode–electrolyte interfaces, which are prone to interfacial resistance, disrupted mass transport, and mechanical failure under flexion. A covalent interface engineering strategy based on electrochemical sol–gel deposition is presented to create mechanically robust, chemically bonded electrochemical interfaces. In this approach, an ∼80 nm thick conformal silanol gel layer is electrochemically deposited to chemically anchor ionic liquid electrolytes to graphite cathodes in flexible aluminum–graphite batteries. This method enables precise control over interfacial thickness and chemistry while preserving electrode flexibility. Electrochemical characterizations using variable-rate cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic cycling demonstrate that covalent interface formation suppresses flex-induced interfacial resistance, shifts charge storage toward surface-controlled regimes, and enables rapid ion transport through ordered interfacial pathways without compromising electronic conductivity. Flexible full cells exhibit stable long-term cycling for >260 cycles with a specific capacity of 56 mAh/g of graphite. Individual electrodes retain electrochemical performance under bending up to 180°. By decoupling mechanical compliance from electrochemical stability, this work establishes a generalizable synthesis strategy for inherently flexible batteries and introduces an interface design paradigm for next-generation wearable and integrated energy storage devices.
Förderung
- University of Illinois at Urbana-Champaign
- European Commission
- Hebrew University of Jerusalem
- A.G. Leventis Foundation
- German Research Council
- Glenn E. and Barbara R. Ullyot Fellowship
- Thomas and Yolanda Stein Graduate Fellowship
Zitieren
APA
Srikant, H., Baek, C. P., Zelikovich, D., Dayan, R. N. F., Founta, E., Braeutigam, E., Kokott, N., Georgiadou, D. G., Esser, B., Mandler, D., & Schoetz, T. (2026). Covalently Bonded Electrochemical Interfaces for Flexible Aluminum–Graphite Electrodes. ACS Applied Engineering Materials, 4(6), 3018-3027. https://doi.org/10.1021/acsaenm.6c00296
Vancouver
Srikant H, Baek CP, Zelikovich D, Dayan RNF, Founta E, Braeutigam E, et al. Covalently Bonded Electrochemical Interfaces for Flexible Aluminum–Graphite Electrodes. ACS Applied Engineering Materials. 2026;4(6):3018-3027. doi:10.1021/acsaenm.6c00296
BibTeX
@article{Srikant2026,
author = {Srikant, Harini and Baek, Carolina Portillos and Zelikovich, Din and Dayan, Rafael Nisim Farca and Founta, Evangelia and Braeutigam, Eva and Kokott, Nico and Georgiadou, Dimitra G. and Esser, Birgit and Mandler, Daniel and Schoetz, Theresa},
title = {Covalently Bonded Electrochemical Interfaces for Flexible Aluminum–Graphite Electrodes},
journal = {ACS Applied Engineering Materials},
year = {2026},
volume = {4},
number = {6},
pages = {3018--3027},
doi = {10.1021/acsaenm.6c00296}
}
EUVIMED