Using Electric Fields for in Situ Curing of Carbon Fiber/Phenolic Composites in Additive Manufacturing
ACS Applied Engineering Materials · 27.03.2026 · 4 (3) · 1389-1397
DOI: 10.1021/acsaenm.5c01110 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 24.02.2026. Verfasst von Christian J McGovern und 7 weiteren Autor:innen. Beteiligte Einrichtung: Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, Texas 77843, United States. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Los Alamos National Laboratory.
Abstract (Originalsprache)
In this paper, we demonstrate electrothermal heating and curing of carbon fiber (CF)/phenolic composites to enable successive deposition for additive manufacturing (aka 3D printing). Electric fields are capable of heating susceptor materials, which makes them a potential heat source for 3D printing thermoset composites, such as CF/Phenolic prepregs. We investigated the heating response of CF/phenolic prepregs when exposed to electric fields and found that our prepregs reached the target temperature of 210 °C when the electric field applicator was supplied with low power (8 W). We also show continuous heating and curing by translating prepregs through an electric field. Finally, we demonstrate additive manufacturing by manually depositing a layer or prepreg, using an electric field to perform in situ curing, and then repeating the process to create multilayer structures. This multilayer structure showed no macroscopic deformation in contrast to conventional methods and showed that additive manufacturing is possible.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, Texas 77843, United States.
- Materials Science and Technology-7, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States.
- Department of Materials Science & Engineering, Texas A&M University, College Station, Texas 77843, United States.
ORCID-Profile: Micah J Green
Förderung
- Los Alamos National Laboratory
Zitieren
APA
McGovern, C. J., Oubre, K. A., Harkin, E. M., Deshpande, S. S., Walker, E. M., Long, C. T., Bernardin, J. D., & Green, M. J. (2026). Using Electric Fields for in Situ Curing of Carbon Fiber/Phenolic Composites in Additive Manufacturing. ACS Applied Engineering Materials, 4(3), 1389-1397. https://doi.org/10.1021/acsaenm.5c01110
Vancouver
McGovern CJ, Oubre KA, Harkin EM, Deshpande SS, Walker EM, Long CT, et al. Using Electric Fields for in Situ Curing of Carbon Fiber/Phenolic Composites in Additive Manufacturing. ACS Applied Engineering Materials. 2026;4(3):1389-1397. doi:10.1021/acsaenm.5c01110
BibTeX
@article{McGovern2026,
author = {McGovern, Christian J and Oubre, Kyle A and Harkin, Ethan M and Deshpande, Sayyam S and Walker, Ethan M and Long, Carolyn T and Bernardin, John D and Green, Micah J},
title = {Using Electric Fields for in Situ Curing of Carbon Fiber/Phenolic Composites in Additive Manufacturing},
journal = {ACS Applied Engineering Materials},
year = {2026},
volume = {4},
number = {3},
pages = {1389--1397},
doi = {10.1021/acsaenm.5c01110}
}
EUVIMED