Surface Reaction Kinetics of Chemical Vapor Infiltration of SiC from CH3SiCl3/H2 Revealed Using Ultradeep Microchannels
ACS Applied Engineering Materials · 26.09.2025 · 3 (9) · 3065-3082
DOI: 10.1021/acsaenm.5c00519 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 17.09.2025. Verfasst von Kohei Shima und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Economy, Trade and Industry, Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Chemical vapor infiltration (CVI) of cubic SiC from methyltrichlorosilane (MTS; CH3SiCl3) and H2 is widely used for conformal coatings and densification of ceramic matrix composites (CMCs). Yet, quantitative surface-reaction kinetics essential for engineering-oriented CVI models remain poorly understood. Here, we determine the apparent sticking probability (η) and concentrations of film-forming species by analyzing deposition rate gradients inside ultradeep microchannels (aspect ratio = 1000:1). Such geometries reveal extremely low η values down to 10–7 under typical CVI reaction conditions (900–1000 °C, 2.7 kPa, ∼1 s), undetectable with conventional trenches (aspect ratio ≤ 100:1). At a H2:MTS ratio of 2.5, the reaction exhibited the first-order kinetics, with MTS and its early-stage intermediates serving as primary film-forming species. The microchannel data distinguished three η regimes: 10–7–10–6 (MTS on Cl-rich surface), 10–4 (MTS on Cl-lean surface), and 10–2 (CH2SiCl3), supported by elementary gas-phase reaction simulations. These regimes followed Arrhenius-type trends with activation energies of 54–196 kJ/mol. Increasing MTS or decreasing H2 slightly reduced η, attributed to adsorption of Cl-containing byproducts, indicating deviations from the strict first-order behavior. The resulting surface-reaction model and kinetic parameters enable predictive simulations of deposition rates and conformality in three-dimensional fibrous preforms. This provides a quantitative framework for optimizing CVI processes to achieve conformal coatings and high throughput, advancing the fabrication of next-generation CMCs.
Förderung
- Ministry of Economy, Trade and Industry
- Japan Society for the Promotion of Science
Zitieren
APA
Shima, K., Otaka, Y., Sato, N., Funato, Y., Sugiura, H., Nakahara, T., Fukushima, Y., Momose, T., & Shimogaki, Y. (2025). Surface Reaction Kinetics of Chemical Vapor Infiltration of SiC from CH3SiCl3/H2 Revealed Using Ultradeep Microchannels. ACS Applied Engineering Materials, 3(9), 3065-3082. https://doi.org/10.1021/acsaenm.5c00519
Vancouver
Shima K, Otaka Y, Sato N, Funato Y, Sugiura H, Nakahara T, et al. Surface Reaction Kinetics of Chemical Vapor Infiltration of SiC from CH3SiCl3/H2 Revealed Using Ultradeep Microchannels. ACS Applied Engineering Materials. 2025;3(9):3065-3082. doi:10.1021/acsaenm.5c00519
BibTeX
@article{Shima2025,
author = {Shima, Kohei and Otaka, Yuhei and Sato, Noboru and Funato, Yuichi and Sugiura, Hidetoshi and Nakahara, Takuya and Fukushima, Yasuyuki and Momose, Takeshi and Shimogaki, Yukihiro},
title = {Surface Reaction Kinetics of Chemical Vapor Infiltration of SiC from CH3SiCl3/H2 Revealed Using Ultradeep Microchannels},
journal = {ACS Applied Engineering Materials},
year = {2025},
volume = {3},
number = {9},
pages = {3065--3082},
doi = {10.1021/acsaenm.5c00519}
}
EUVIMED