EUVIMEDEUVIMED entdecken
Crossref

Polymer-Dispersed Liquid Crystal Films with Low-Driving Voltage and Fast Response

Manoj M. Mhatre, Anuja Katariya-Jain, Pushpinder G. Bhatia, R. R. Deshmukh

ACS Applied Engineering Materials · 27.06.2025 · 3 (6) · 1844-1860

DOI: 10.1021/acsaenm.5c00247 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 04.06.2025. Verfasst von Manoj M. Mhatre und 3 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 72 Literaturangaben. Gefördert von: Council of Scientific and Industrial Research, India, University Grants Commission, Department of Science and Technology, Ministry of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, the demand for energy-efficient building technologies using smart windows has been growing due to the ongoing energy crisis. The fabrication of polymer-dispersed liquid crystal (PDLC) films for smart windows requires meeting crucial criteria, such as lower driving voltage, improved contrast, faster response, and reduced relaxation time. In this study, PDLC films were prepared using the polymerization-induced phase separation (PIPS) method, incorporating nematic liquid crystals QYPDLC-421 (LC421), 3-SH thiol monomers (trimethylolpropane tris(3-mercaptopropionate)), cross-linker-1,4-butanediol diacrylate (BDDA), and dopants such as disperse orange 25 (DO25) dye and multiwalled carbon nanotubes (MWCNTs) to enhance the electro-optical and dielectric properties. Scanning electron microscopy (SEM) was employed to study the morphology of LC droplet cavities formed within the cross-linked polymer network. The PDLC film with 3-SH/BDDA (30/10 wt %) exhibits reduced driving voltage, faster response time, and lower relaxation time due to weak anchoring at the LC-polymer interface, which facilitates easier realignment of LC molecules under an applied field. These properties are further improved with the addition of DO25 (0.1 wt %) and a combination of DO25/MWCNTs (0.1/0.05 wt %). The impedance spectroscopy of these films was studied using a precision impedance analyzer over a frequency range of 20 Hz to 20 MHz at room temperature, and an electrical equivalent circuit (EEC) was modeled using the EIS spectrum analyzer software.

Förderung

  • Council of Scientific and Industrial Research, India
  • University Grants Commission
  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Mhatre, M. M., Katariya-Jain, A., Bhatia, P. G., & Deshmukh, R. R. (2025). Polymer-Dispersed Liquid Crystal Films with Low-Driving Voltage and Fast Response. ACS Applied Engineering Materials, 3(6), 1844-1860. https://doi.org/10.1021/acsaenm.5c00247

Vancouver

Mhatre MM, Katariya-Jain A, Bhatia PG, Deshmukh RR. Polymer-Dispersed Liquid Crystal Films with Low-Driving Voltage and Fast Response. ACS Applied Engineering Materials. 2025;3(6):1844-1860. doi:10.1021/acsaenm.5c00247

BibTeX
@article{Mhatre2025,
  author = {Mhatre, Manoj M. and Katariya-Jain, Anuja and Bhatia, Pushpinder G. and Deshmukh, R. R.},
  title = {Polymer-Dispersed Liquid Crystal Films with Low-Driving Voltage and Fast Response},
  journal = {ACS Applied Engineering Materials},
  year = {2025},
  volume = {3},
  number = {6},
  pages = {1844--1860},
  doi = {10.1021/acsaenm.5c00247}
}
Kostenlos starten →