EUVIMEDEUVIMED entdecken
Crossref

Copper Mesh/Expanded Graphite Dual Heat-Transfer Networks Enabling High-Conductivity Composite Phase Change Materials toward Thermal Management

Xingang Yu, Yingying Tian, Yong Li, Xiubing Huang

ACS Applied Energy Materials · 17.11.2026

DOI: 10.1021/acsaem.6c02806 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 17.11.2026. Verfasst von Xingang Yu und 3 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-power electronic devices, due to heat accumulation, urgently require thermal management materials that combine rapid heat dissipation with transient thermal storage capabilities. Paraffin-based phase change materials (PCMs) are promising candidates owing to their high latent heat, but their intrinsically low thermal conductivity and leakage issues during solid–liquid phase transition severely limit practical applications. Herein, a copper mesh/expanded graphite (EG) dual heat-transfer network strategy is developed for highly thermally conductive composite PCMs. The Cu mesh provides continuous conductive pathways, while the EG sheets facilitate heat transport within the EG/paraffin wax (PW) regions. The porous structure of EG also supports PW. In laminated EG/PW-CuX composites, the optimized EG/PW-Cu16 achieves a high in-plane thermal conductivity of 51.33 W·m–1·K–1 and a latent heat of 134.46 J·g–1, enabling efficient localized hot-spot spreading and planar temperature homogenization. To further meet the through-plane heat-flow requirement of chip-to-heat-sink thermal management, the spatial organization of the same Cu mesh/EG dual-network system is adjusted to construct PCC-X composites. The optimized PCC-40 exhibits a through-plane thermal conductivity of 24.71 W·m–1·K–1 while retaining a latent heat of 153.94 J·g–1. Simulated chip thermal management tests demonstrate that PCC-40 reduces the equilibrium heater temperature from 98.10 to 81.12 °C at 20 W compared with a commercial thermal pad. This hierarchical Cu-mesh/EG dual network provides an effective strategy for balancing directional heat transfer and latent-heat storage in CPCMs for electronic thermal management.

Förderung

  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yu, X., Tian, Y., Li, Y., & Huang, X. (2026). Copper Mesh/Expanded Graphite Dual Heat-Transfer Networks Enabling High-Conductivity Composite Phase Change Materials toward Thermal Management. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.6c02806

Vancouver

Yu X, Tian Y, Li Y, Huang X. Copper Mesh/Expanded Graphite Dual Heat-Transfer Networks Enabling High-Conductivity Composite Phase Change Materials toward Thermal Management. ACS Applied Energy Materials. 2026. doi:10.1021/acsaem.6c02806

BibTeX
@article{Yu2026,
  author = {Yu, Xingang and Tian, Yingying and Li, Yong and Huang, Xiubing},
  title = {Copper Mesh/Expanded Graphite Dual Heat-Transfer Networks Enabling High-Conductivity Composite Phase Change Materials toward Thermal Management},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  doi = {10.1021/acsaem.6c02806}
}
Kostenlos starten →