Boosting the Efficiency of Quasi-Two-Dimensional Perovskite Light-Emitting Diodes via Synergistic PVP Interfacial Engineering and BAP Additive Passivation
ACS Applied Energy Materials · 16.11.2026
DOI: 10.1021/acsaem.6c02763 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 16.11.2026. Verfasst von Yuan Chen und 7 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Natural Science Foundation of Guangxi Zhuang Autonomous Region, National Natural Science Foundation of China, Third Batch of Longyuan Young Talents Program in Gansu Province.
Abstract (Originalsprache)
Owing to their outstanding optoelectronic characteristics, quasi-two-dimensional (quasi-2D) perovskite light-emitting diodes (PeLEDs) have emerged as promising candidates for next-generation light sources. However, their practical performance is still constrained by poor film morphology and severe nonradiative recombination. In this work, interface engineering combined with additive engineering is employed to synergistically optimize PEA2Csn–1PbnBr3n+1 perovskite films and improve the performance of the corresponding PeLEDs. Polyvinylpyrrolidone (PVP) is introduced as an interfacial modifier for the hole transport layer (HTL), which markedly enhances the wettability of the perovskite precursor solution, leading to the formation of compact and uniform perovskite films and enabling an external quantum efficiency (EQE) of 12.49%. In addition, potassium benzoate (BAP) is incorporated as a functional additive to achieve dual defect passivation, where the COO– groups coordinate with undercoordinated Pb2+ species, while K+ ions simultaneously interact with Br– ions. As a consequence, the optimized perovskite films display a substantial increase in photoluminescence quantum yield (PLQY), rising from 26.4% to 82.4%, together with an extended carrier lifetime from 11.93 to 31.41 ns. Benefiting from the synergistic modification strategy, the optimized PeLEDs achieve a peak EQE of 17.48% together with a maximum luminance of 57,270 cd/m2 at 512 nm, representing 1.40-fold and 2.87-fold improvements, respectively, relative to the PVP-only devices. Overall, this work demonstrates an effective dual-modification strategy that offers a practical route toward high-efficiency quasi-2D PeLEDs with improved film morphology, defect tolerance, charge injection balance, and fabrication reproducibility. Operational lifetime and water/oxygen stability were not evaluated in this work.
Förderung
- Natural Science Foundation of Guangxi Zhuang Autonomous Region
- National Natural Science Foundation of China
- Third Batch of Longyuan Young Talents Program in Gansu Province
- Scientific and Technological Bases and Talents of Guangxi
Zitieren
APA
Chen, Y., Wan, Y., Yang, C., Yin, J., Wang, Z., Zhang, Z., Zhang, Z., & Zhang, H. (2026). Boosting the Efficiency of Quasi-Two-Dimensional Perovskite Light-Emitting Diodes via Synergistic PVP Interfacial Engineering and BAP Additive Passivation. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.6c02763
Vancouver
Chen Y, Wan Y, Yang C, Yin J, Wang Z, Zhang Z, et al. Boosting the Efficiency of Quasi-Two-Dimensional Perovskite Light-Emitting Diodes via Synergistic PVP Interfacial Engineering and BAP Additive Passivation. ACS Applied Energy Materials. 2026. doi:10.1021/acsaem.6c02763
BibTeX
@article{Chen2026,
author = {Chen, Yuan and Wan, Yanfu and Yang, Chunyan and Yin, Junlei and Wang, Zerui and Zhang, Zixiang and Zhang, Zhentao and Zhang, Heng},
title = {Boosting the Efficiency of Quasi-Two-Dimensional Perovskite Light-Emitting Diodes via Synergistic PVP Interfacial Engineering and BAP Additive Passivation},
journal = {ACS Applied Energy Materials},
year = {2026},
doi = {10.1021/acsaem.6c02763}
}
EUVIMED