EUVIMEDEUVIMED entdecken
Crossref

Influences of Nanostructuring and Densification Processes on the Lattice Thermal Conductivity of n -Type Indium Antimonide

Usharani Valaparla, Surafel Shiferaw Legese, Naohito Tsujii, Aloke Kumar Pathak, Tanmoy Ghosh, Kamanio Chattopadhyay, Takao Mori, Suresh Perumal

ACS Applied Energy Materials · 09.11.2026 · 9 (21) · 14450-14460

DOI: 10.1021/acsaem.6c02619 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 15.10.2026. Verfasst von Usharani Valaparla und 7 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Gefördert von: JST-Mirai Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Indium antimonide (InSb), an n-type narrow-band gap semiconductor, has attracted considerable interest in intermediate-temperature thermoelectric (TE) applications due to its excellent electronic transport properties; however, its relatively high lattice thermal conductivity limits its TE performance. Here, we explore the effects of mechanical milling and densification techniques on the structural, vibrational, thermoelectric, and mechanical properties of InSb prepared by the solid-state melting route, then ball-milled and densified via resistive hot-press (RHP) and induction-assisted hot-press (IHP). Phase identification and microstructural analyses of InSb have been examined by powder X-ray diffraction and electron probe microanalysis. Mechanical milling drastically reduces the crystallite size, suppresses the lattice thermal conductivity (κlat) through enhanced phonon scattering, and decreases electrical conductivity due to reduced carrier mobility. Further, the milled samples densified by RHP and IHP have shown ultralow κlat values of ∼3.46 and ∼4.69 W m–1 K–1 at 300 K, respectively, illustrating reductions of ∼50% and ∼47% compared to bulk RHP and IHP samples. The maximum zT of ∼0.38 at 723 K was obtained for bulk RHP, along with a high mechanical hardness of 2.14 GPa, implying that InSb is a potential n-type candidate for intermediate-temperature TE applications.

Förderung

  • JST-Mirai Program

Zitieren

APA

Valaparla, U., Legese, S. S., Tsujii, N., Pathak, A. K., Ghosh, T., Chattopadhyay, K., Mori, T., & Perumal, S. (2026). Influences of Nanostructuring and Densification Processes on the Lattice Thermal Conductivity of n -Type Indium Antimonide. ACS Applied Energy Materials, 9(21), 14450-14460. https://doi.org/10.1021/acsaem.6c02619

Vancouver

Valaparla U, Legese SS, Tsujii N, Pathak AK, Ghosh T, Chattopadhyay K, et al. Influences of Nanostructuring and Densification Processes on the Lattice Thermal Conductivity of n -Type Indium Antimonide. ACS Applied Energy Materials. 2026;9(21):14450-14460. doi:10.1021/acsaem.6c02619

BibTeX
@article{Valaparla2026,
  author = {Valaparla, Usharani and Legese, Surafel Shiferaw and Tsujii, Naohito and Pathak, Aloke Kumar and Ghosh, Tanmoy and Chattopadhyay, Kamanio and Mori, Takao and Perumal, Suresh},
  title = {Influences of Nanostructuring and Densification Processes on the Lattice Thermal Conductivity of n -Type Indium Antimonide},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  volume = {9},
  number = {21},
  pages = {14450--14460},
  doi = {10.1021/acsaem.6c02619}
}
Kostenlos starten →