High-Flux Catalytically Activated Ba0.5Sr0.5Co0.8Fe0.2O3–δ Oxygen Transport Membranes toward Oxyfuel Applications
ACS Applied Energy Materials · 10.11.2026
DOI: 10.1021/acsaem.6c02516 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 10.11.2026. Verfasst von María Balaguer und 11 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Generalitat Valenciana, Ministerio de Ciencia, Innovaci?n y Universidades, HORIZON EUROPE Climate, Energy and Mobility.
Abstract (Originalsprache)
Oxygen transport membranes (OTMs) are a potential route to reduce the energy penalty associated with O2 production for oxyfuel combustion, although their practical implementation requires sufficiently high oxygen permeation rates under technologically relevant operating conditions. In this work, we demonstrate that the performance of Ba0.5Sr0.5Co0.8Fe0.2O3–δ (BSCF) membranes can be substantially enhanced through membrane design, and also by operating them under conditions that appropriately exploit their transport properties. Supported asymmetric BSCF membranes with 20 and 60 µm dense layers were first compared as a function of temperature, feed-side oxygen partial pressure, and Ar sweep flow, showing that further membrane thinning provides progressively limited gains, as surface and gas-phase transport resistances become increasingly relevant. The 60 µm architecture was used to investigate catalytic surface activation with porous BSCF layers modified with Ag or Pd. The Pd-activated membrane exhibited 98 and 12 mL·min–1·cm–2 at 950 and 650 °C, respectively and under O2/Ar gradient, which are among the highest O2 permeation fluxes reported for supported planar OTMs, and exceeding the frequently cited target of 10 mL·min–1·cm–2 at intermediate temperatures. The improvement caused by surface activation, especially at lower temperatures, and the decrease in the apparent activation energy, is consistent with a permeation regime limited by surface exchange kinetics. Additional sweep-flow experiments confirm the strong dependence of permeation on the permeate boundary conditions. These results demonstrate that BSCF membranes can be carefully designed and operated under appropriate oxygen chemical potential gradients and conditions to fully exploit their exceptional oxygen transport properties, providing a basis for future validation under 3-end operating conditions in oxyfuel configurations.
Förderung
- Generalitat Valenciana
- Ministerio de Ciencia, Innovaci?n y Universidades
- HORIZON EUROPE Climate, Energy and Mobility
- FP7 Energy
Zitieren
APA
Balaguer, M., Garcia-Fayos, J., Laqdiem, M., Catalán-Martínez, D., Lobera, M. P., Canales-Vázquez, J., Nijmeijer, A., Schulze-Küppers, F., Meulenberg, W. A., Veenstra, P., Almar, L., & Serra, J. M. (2026). High-Flux Catalytically Activated Ba0.5Sr0.5Co0.8Fe0.2O3–δ Oxygen Transport Membranes toward Oxyfuel Applications. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.6c02516
Vancouver
Balaguer M, Garcia-Fayos J, Laqdiem M, Catalán-Martínez D, Lobera MP, Canales-Vázquez J, et al. High-Flux Catalytically Activated Ba0.5Sr0.5Co0.8Fe0.2O3–δ Oxygen Transport Membranes toward Oxyfuel Applications. ACS Applied Energy Materials. 2026. doi:10.1021/acsaem.6c02516
BibTeX
@article{Balaguer2026,
author = {Balaguer, María and Garcia-Fayos, Julio and Laqdiem, Marwan and Catalán-Martínez, David and Lobera, M. Pilar and Canales-Vázquez, Jesús and Nijmeijer, Arian and Schulze-Küppers, Falk and Meulenberg, Wilhelm A. and Veenstra, Peter and Almar, Laura and Serra, Jose M.},
title = {High-Flux Catalytically Activated Ba0.5Sr0.5Co0.8Fe0.2O3–δ Oxygen Transport Membranes toward Oxyfuel Applications},
journal = {ACS Applied Energy Materials},
year = {2026},
doi = {10.1021/acsaem.6c02516}
}
EUVIMED