EUVIMEDEUVIMED entdecken
Crossref

Perovskite Oxide Solar Absorber with 94% Solar Absorptance and Stability to 1300 °C

Ikbal Kabir, Philipp Good, Gianluca Ambrosetti, Thomas A. Cooper

ACS Applied Energy Materials · 05.11.2026

DOI: 10.1021/acsaem.6c02152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 05.11.2026. Verfasst von Ikbal Kabir und 3 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Gefördert von: York University, Synhelion AG.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present a perovskite oxide solar thermal absorber material with a solar absorptance exceeding 0.935 ± 0.01 and stability to 1300 °C in both air and steam environments. The material is based on doped lanthanum manganite La0.8Ca0.2Mn0.8Al0.2O3 pigment, obtained via facile sol–gel synthesis, and subsequently prepared into a paintable paste-like coating amenable to a range of application techniques including brush, doctor blade, and spray deposition. The material exhibits strong broadband absorption across the ultraviolet–visible–near-infrared (UV–Vis–NIR) range, with a peak spectral absorptance up to 0.950 at a wavelength of 0.6 μm, which closely aligns with the peak in the solar spectrum. Cycling in ultrahigh-temperature conditions using a purpose-built cycling furnace revealed the noteworthy stability of the material, with a reduction in solar absorptance of just 0.2% after five consecutive 12 h cycles at 1300 °C followed by a 100 h hold. This work introduces perovskite oxides as ultrahigh temperature photothermal absorber materials, positioning them as promising materials to enable the next generation of ultrahigh temperature solar thermal systems.

Förderung

  • York University
  • Synhelion AG

Zitieren

APA

Kabir, I., Good, P., Ambrosetti, G., & Cooper, T. A. (2026). Perovskite Oxide Solar Absorber with 94% Solar Absorptance and Stability to 1300 °C. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.6c02152

Vancouver

Kabir I, Good P, Ambrosetti G, Cooper TA. Perovskite Oxide Solar Absorber with 94% Solar Absorptance and Stability to 1300 °C. ACS Applied Energy Materials. 2026. doi:10.1021/acsaem.6c02152

BibTeX
@article{Kabir2026,
  author = {Kabir, Ikbal and Good, Philipp and Ambrosetti, Gianluca and Cooper, Thomas A.},
  title = {Perovskite Oxide Solar Absorber with 94% Solar Absorptance and Stability to 1300 °C},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  doi = {10.1021/acsaem.6c02152}
}
Kostenlos starten →