EUVIMEDEUVIMED entdecken
Crossref

Aniline-Fluoroalkyl Interfacial Passivation Enables Defect-Suppressed and Moisture-Resistant Perovskite Solar Cells

Jin-Hui Wu, Yu-Tang Hong, Shoaib Siddique, Bo-Tau Liu

ACS Applied Energy Materials · 27.07.2026 · 9 (14) · 9497-9506

DOI: 10.1021/acsaem.6c01560 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 17.07.2026. Verfasst von Jin-Hui Wu und 3 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is inevitable that the solution process induces imperfect crystal and rich deep/shallow-level defects in the perovskite layer for the fabrication of perovskite solar cells (PSCs). These fatal issues hinder the development of high efficiency and mass production. Here, we report a bifunctional surface-passivation strategy using m-bis(trifluoromethyl)aniline (mTFMA) at the perovskite/hole-transport-layer interface. The Lewis-basic aniline nitrogen interacts with under-coordinated lead sites, while the fluorinated aromatic framework improves surface hydrophobicity and interfacial compatibility. After mTFMA surface treatment, the perovskite film becomes pinhole-free and exhibits stronger steady-state photoluminescence. The average carrier lifetime is prolonged from 529.7 to 2479.4 ns, while the trap-state density is reduced from 1.25 × 1015 to 7.73 × 1014 cm−3. Consequently, the optimized mTFMA-treated device delivers an 11.9% improvement in PCE compared with the control cell. Light-intensity-dependent VOC, impedance spectroscopy, and hysteresis analysis confirm that mTFMA suppresses trap-assisted recombination and interfacial charge accumulation. Relative to the conventional phenethylammonium iodide treatment, mTFMA provides more effective trap suppression, smoother surface morphology, higher hydrophobicity, and superior photovoltaic performance. This work highlights fluorinated aniline molecules as promising nonammonium interfacial modifiers for efficient and stable PSCs.

Förderung

  • National Science and Technology Council

Zitieren

APA

Wu, J., Hong, Y., Siddique, S., & Liu, B. (2026). Aniline-Fluoroalkyl Interfacial Passivation Enables Defect-Suppressed and Moisture-Resistant Perovskite Solar Cells. ACS Applied Energy Materials, 9(14), 9497-9506. https://doi.org/10.1021/acsaem.6c01560

Vancouver

Wu J, Hong Y, Siddique S, Liu B. Aniline-Fluoroalkyl Interfacial Passivation Enables Defect-Suppressed and Moisture-Resistant Perovskite Solar Cells. ACS Applied Energy Materials. 2026;9(14):9497-9506. doi:10.1021/acsaem.6c01560

BibTeX
@article{Wu2026,
  author = {Wu, Jin-Hui and Hong, Yu-Tang and Siddique, Shoaib and Liu, Bo-Tau},
  title = {Aniline-Fluoroalkyl Interfacial Passivation Enables Defect-Suppressed and Moisture-Resistant Perovskite Solar Cells},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  volume = {9},
  number = {14},
  pages = {9497--9506},
  doi = {10.1021/acsaem.6c01560}
}
Kostenlos starten →