EUVIMEDEUVIMED entdecken
Crossref

Safer Sodium Storage through Carbon Coatings on Aluminum Current Collectors for Anode-less Metal Batteries

David Patrun, Ziyaad Aytuna, Si Zhao, Junjie Liu, Yasuyuki Kondo, Katsumasa Torii, Yu Katayama, Thomas Fischer, Tohru Sekino, Zhensheng Hong, Yuki Yamada, Sanjay Mathur

ACS Applied Energy Materials · 14.09.2026 · 9 (17) · 11416-11428

DOI: 10.1021/acsaem.6c01559 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 18.08.2026. Verfasst von David Patrun und 11 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science, JECS Trust, German Research Council (DFG).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dendrite growth and formation of an unstable solid electrolyte interphase (SEI) remain major obstacles for anode-less sodium metal batteries (SMBs). Surface modification of current collectors (CCs) is a key strategy for suppressing dendrite formation and stabilizing the SEI, leading to safer and longer-lasting SMBs. Herein, we developed a carbon-coated aluminum foil, enabling >99.9% retention in coulombic efficiency and 600 plating/stripping cycles at 2 mA cm–2. Additionally, high reversibility was demonstrated in cycling performance, even after cycling at higher current densities of up to 6 mA cm–2. A careful optimization of the coating thickness was conducted to minimize electrode volume and weight, yielding a thin (∼700 nm) and ultralight (<0.05 mg/cm2) carbon modification on Al current collectors in an anode-less configuration, while maintaining enhanced performance. The sodiophilic nature of the porous, carbon overlayer deposited by plasma-enhanced chemical vapor deposition suppresses the formation of dead sodium and stabilizes the SEI, as proven by correlative analyses using SEM, EIS, EDS, and XPS. C@Al||NVP full-cells delivered 87.8 mAh g–1 after 45 cycles at 1C and rate stability with an average capacity of 67.8 mAh g–1 at 5C. Our carbon-coated aluminum foil offers a cost-effective and abundant CC for SMBs, which suppresses the formation of sodium dendrites to enhance battery lifetime.

Förderung

  • Japan Society for the Promotion of Science
  • JECS Trust
  • German Research Council (DFG)

Zitieren

APA

Patrun, D., Aytuna, Z., Zhao, S., Liu, J., Kondo, Y., Torii, K., Katayama, Y., Fischer, T., Sekino, T., Hong, Z., Yamada, Y., & Mathur, S. (2026). Safer Sodium Storage through Carbon Coatings on Aluminum Current Collectors for Anode-less Metal Batteries. ACS Applied Energy Materials, 9(17), 11416-11428. https://doi.org/10.1021/acsaem.6c01559

Vancouver

Patrun D, Aytuna Z, Zhao S, Liu J, Kondo Y, Torii K, et al. Safer Sodium Storage through Carbon Coatings on Aluminum Current Collectors for Anode-less Metal Batteries. ACS Applied Energy Materials. 2026;9(17):11416-11428. doi:10.1021/acsaem.6c01559

BibTeX
@article{Patrun2026,
  author = {Patrun, David and Aytuna, Ziyaad and Zhao, Si and Liu, Junjie and Kondo, Yasuyuki and Torii, Katsumasa and Katayama, Yu and Fischer, Thomas and Sekino, Tohru and Hong, Zhensheng and Yamada, Yuki and Mathur, Sanjay},
  title = {Safer Sodium Storage through Carbon Coatings on Aluminum Current Collectors for Anode-less Metal Batteries},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  volume = {9},
  number = {17},
  pages = {11416--11428},
  doi = {10.1021/acsaem.6c01559}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche