EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Managing Alkaline CO2 Electrolyzer Flooding using a Grooved Cathode Gas Diffusion Electrode

Aida Farsi, Vasant Batta, Jason K.D. Chan, Rui Kai Miao, Prasad V. Sarma, David Sinton, Aimy Bazylak

ACS Applied Energy Materials · 14.09.2026 · 9 (17) · 11179-11191

DOI: 10.1021/acsaem.6c01086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 25.08.2026. Verfasst von Aida Farsi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery Grants Program, Canada Research Chairs Program, Government of Canada?s New Frontiers in Research Fund (NFRF).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrochemical reduction of CO2 to CO is a promising approach for curtailing CO2 emissions. However, anolyte flooding of the cathode gas diffusion electrode (GDE) lowers CO Faradaic efficiencies (FEs), specifically at high current densities, presenting a barrier to scale-up. In this work, we present a grooved cathode GDE in an alkaline CO2 electrolyzer that purposely drains anolyte via through-plane holes at the electrode edges, mitigating the flooding-induced shift from CO2 reduction to the hydrogen evolution reaction. Under wet CO2 at 250 mA/cm2 for 6 h, the grooved GDE limited the CO FE decline to 18.1%, compared with 38.4% for the regular GDE. Under the same current density and duration in dry CO2, where salt precipitation becomes more severe, grooves reduced salt-induced mass transport resistance in the cathode (0.62 Ω·cm2 versus 1.3 Ω·cm2) and limited CO FE decline to 29.8%, compared with 35.5% for the regular GDE. Pore network modeling showed lower average anolyte saturation in the grooved microporous layer (MPL, 61%) compared to the nongrooved MPL (82%) and indicated preferential anolyte flow through the grooves and through-plane holes, consistent with the observed performance gains.

Förderung

  • Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery Grants Program
  • Canada Research Chairs Program
  • Government of Canada?s New Frontiers in Research Fund (NFRF)
  • Dorothy Killam Foundation

Zitieren

APA

Farsi, A., Batta, V., Chan, J. K., Miao, R. K., Sarma, P. V., Sinton, D., & Bazylak, A. (2026). Managing Alkaline CO2 Electrolyzer Flooding using a Grooved Cathode Gas Diffusion Electrode. ACS Applied Energy Materials, 9(17), 11179-11191. https://doi.org/10.1021/acsaem.6c01086

Vancouver

Farsi A, Batta V, Chan JK, Miao RK, Sarma PV, Sinton D, et al. Managing Alkaline CO2 Electrolyzer Flooding using a Grooved Cathode Gas Diffusion Electrode. ACS Applied Energy Materials. 2026;9(17):11179-11191. doi:10.1021/acsaem.6c01086

BibTeX
@article{Farsi2026,
  author = {Farsi, Aida and Batta, Vasant and Chan, Jason K.D. and Miao, Rui Kai and Sarma, Prasad V. and Sinton, David and Bazylak, Aimy},
  title = {Managing Alkaline CO2 Electrolyzer Flooding using a Grooved Cathode Gas Diffusion Electrode},
  journal = {ACS Applied Energy Materials},
  year = {2026},
  volume = {9},
  number = {17},
  pages = {11179--11191},
  doi = {10.1021/acsaem.6c01086}
}
Kostenlos starten →