Ionomer Loading Effects on the Performance of Ni Single-Atom Catalyst Layers in a Forward-Bias Bipolar Membrane CO2 Electrolyzer
ACS Applied Energy Materials · 27.07.2026 · 9 (14) · 9181-9193
DOI: 10.1021/acsaem.6c01060 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 03.07.2026. Verfasst von Jiyun Kwen und 4 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Synfuel initiative of the ETH domain.
Abstract (Originalsprache)
In this study, the effect of the ionomer loading on the performance of a nickel single-atom catalyst (Ni-SAC) implemented as the cathode catalyst layer (CL) of a forward-bias bipolar membrane (FB-BPM) zero-gap CO2-electrolyzer was systematically investigated. By varying the ionomer-to-catalyst (I/C) mass ratio at a fixed catalyst loading (1.0 mg·cm–2), we reveal a critical trade-off between ionic conductivity and mass transport within these Ni-SAC catalyst layers. While high ionomer loadings (i.e., I/C values >0.75) improve ionic transport, they simultaneously exacerbate pore blockage and water accumulation within the corresponding CLs, leading to mass transport limitations under full cell operation. As a result, Ni-SAC electrodes with low ionomer loadings (I/C ≤0.75) achieve CO Faradaic efficiencies (FECO) ≥80% at current densities ≤150 mA·cm–2, whereas higher ionomer contents lead to a decrease in FECO accompanied by an increase in cell voltage. Notably, all electrodes exhibit a sharp voltage increase at the latest when reaching a current density of 200 mA·cm–2, highlighting a system-level limitation that we associate with local CO2 depletion. These findings provide initial design guidelines for optimizing Ni-SAC/PiperION cathode CL-microenvironments in FB-BPM CO2-electrolyzers.
Förderung
- Synfuel initiative of the ETH domain
Zitieren
APA
Kwen, J., Clark, A. H., Weber, A., Schmidt, T. J., & Herranz, J. (2026). Ionomer Loading Effects on the Performance of Ni Single-Atom Catalyst Layers in a Forward-Bias Bipolar Membrane CO2 Electrolyzer. ACS Applied Energy Materials, 9(14), 9181-9193. https://doi.org/10.1021/acsaem.6c01060
Vancouver
Kwen J, Clark AH, Weber A, Schmidt TJ, Herranz J. Ionomer Loading Effects on the Performance of Ni Single-Atom Catalyst Layers in a Forward-Bias Bipolar Membrane CO2 Electrolyzer. ACS Applied Energy Materials. 2026;9(14):9181-9193. doi:10.1021/acsaem.6c01060
BibTeX
@article{Kwen2026,
author = {Kwen, Jiyun and Clark, Adam H. and Weber, Anja and Schmidt, Thomas J. and Herranz, Juan},
title = {Ionomer Loading Effects on the Performance of Ni Single-Atom Catalyst Layers in a Forward-Bias Bipolar Membrane CO2 Electrolyzer},
journal = {ACS Applied Energy Materials},
year = {2026},
volume = {9},
number = {14},
pages = {9181--9193},
doi = {10.1021/acsaem.6c01060}
}
EUVIMED