EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fluorine-Lean Phosphonated Polymers of Intrinsic Microporosity with High Oxygen Permeability as a PEMFC Catalyst Layer Ionomer

Theresa Stigler iD, Tamas Nemeth, Patrick Fortin iD, Simon Thiele iD, Jochen Kerres iD

ACS Applied Energy Materials · 14.04.2025 · 8 (7) · 4629-4639

DOI: 10.1021/acsaem.5c00265 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 28.03.2025. Verfasst von Theresa Stigler und 4 weiteren Autor:innen. Beteiligte Einrichtung: Forschungszentrum Jülich GmbH, Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IET-2), Cauerstr. 1, Erlangen 91058, Germany. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium f?r Bildung und Forschung, Norges Forskningsr?d, HORIZON EUROPE Climate, Energy and Mobility.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An essential component of proton exchange membrane fuel cell (PEMFC) technology is the catalyst layer ionomer, serving as the binder and transport matrix responsible for the macroporous electrode structure and the regulation of proton and reactant gas supply to the catalyst interface. To improve the mass transport properties of the catalyst layer, we developed a fluorine-lean phosphonated polymer of intrinsic microporosity (pPIM). The highly kinked structure of the pPIM results in an ionomeric network with increased porosity to promote enhanced gas diffusion through the ionomer layer, while the incorporation of phosphonic acid head groups provides efficient proton conduction. Increased gas permeability of the ionomer is an important factor for effectively mitigating local transport losses that typically occur at high current densities. In situ PEMFC tests were carried out where the pPIM was utilized as the ionomer in the catalyst layer on both the anode and the cathode side. The ionomer-to-carbon (I/C) ratio was varied to evaluate its impact on the oxygen diffusion coefficient and overall fuel cell performance. A higher oxygen diffusion coefficient was achieved with the pPIM using an I/C ratio of 0.2, compared to the Nafion-based catalyst layer.

Autor:innen und Institutionen

  • Forschungszentrum Jülich GmbH, Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IET-2), Cauerstr. 1, Erlangen 91058, Germany.
  • Department of Chemical and Biological Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Immerwahrstr. 2a, Erlangen 91058, Germany.
  • Department of Sustainable Energy Technology, SINTEF Industry, Trondheim 7034 Norway.
  • Chemical Resource Beneficiation Faculty of Natural Sciences, North-West University, Potchefstroom 2520, South Africa.

ORCID-Profile: Theresa Stigler, Patrick Fortin, Simon Thiele, Jochen Kerres

Förderung

  • Bundesministerium f?r Bildung und Forschung
  • Norges Forskningsr?d
  • HORIZON EUROPE Climate, Energy and Mobility

Zitieren

APA

Stigler, T., Nemeth, T., Fortin, P., Thiele, S., & Kerres, J. (2025). Fluorine-Lean Phosphonated Polymers of Intrinsic Microporosity with High Oxygen Permeability as a PEMFC Catalyst Layer Ionomer. ACS Applied Energy Materials, 8(7), 4629-4639. https://doi.org/10.1021/acsaem.5c00265

Vancouver

Stigler T, Nemeth T, Fortin P, Thiele S, Kerres J. Fluorine-Lean Phosphonated Polymers of Intrinsic Microporosity with High Oxygen Permeability as a PEMFC Catalyst Layer Ionomer. ACS Applied Energy Materials. 2025;8(7):4629-4639. doi:10.1021/acsaem.5c00265

BibTeX
@article{Stigler2025,
  author = {Stigler, Theresa and Nemeth, Tamas and Fortin, Patrick and Thiele, Simon and Kerres, Jochen},
  title = {Fluorine-Lean Phosphonated Polymers of Intrinsic Microporosity with High Oxygen Permeability as a PEMFC Catalyst Layer Ionomer},
  journal = {ACS Applied Energy Materials},
  year = {2025},
  volume = {8},
  number = {7},
  pages = {4629--4639},
  doi = {10.1021/acsaem.5c00265}
}
Kostenlos starten →