Engineering Dual p–n-Type CuI with Significant Enhanced Performance for Advanced Thermoelectric Applications
ACS Applied Energy Materials · 10.02.2025 · 8 (3) · 1864-1878
DOI: 10.1021/acsaem.4c03130 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 27.01.2025. Verfasst von Mustafa Majid Rashak Al-Fartoos und 3 weiteren Autor:innen. Beteiligte Einrichtung: Solar Energy Research Group, Department of Engineering, Environment and Sustainability Institute, University of Exeter, Penryn Campus, Penryn, Cornwa…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Higher Committee for Education Development in Iraq.
Abstract (Originalsprache)
CuI is a well-known thermoelectric (TE) material recognized for its p-type characteristics. However, the development of its n-type counterpart and the integration of both p- and n-type CuI in thermoelectric generators (TEGs) remain largely unexplored. In this study, we successfully tuned the thermoelectric properties of CuI by strategically incorporating Ag, enabling the synthesis of both p-type (Ag0.2Cu0.8I) and n-type (Ag0.9Cu0.1I) materials using a cost-effective, greener, and scalable successive ionic layer adsorption and reaction (SILAR) method. The p-type Ag0.2Cu0.8I exhibited a figure of merit (ZT) of 0.47 at 340 K, driven by a high Seebeck coefficient of 810 μV·K-1. In contrast, the n-type Ag0.9Cu0.1I achieved an exceptional ZT of 2.5 at 340 K, attributed to an ultrahigh Seebeck coefficient of -1891 μV·K-1. These superior thermoelectric properties make CuI-based materials attractive alternatives to conventional TE materials, such as Bi2Te3 and PbTe, which are limited by toxicity and resource scarcity. Furthermore, a prototype thermoelectric glazing unit (5 × 5 cm2) demonstrated a 14 K temperature differential, highlighting its dual functionality in power generation and building heat loss mitigation. These findings underscore the potential of low-cost CuI-based materials for advancing sustainable energy technologies.
Autor:innen und Institutionen
- Solar Energy Research Group, Department of Engineering, Environment and Sustainability Institute, University of Exeter, Penryn Campus, Penryn, Cornwall TR10 9FE, United Kingdom.
ORCID-Profile: Anurag Roy, Asif Ali Tahir
Förderung
- Engineering and Physical Sciences Research Council
- Higher Committee for Education Development in Iraq
Zitieren
APA
Al-Fartoos, M. M. R., Roy, A., Mallick, T. K., & Tahir, A. A. (2025). Engineering Dual p–n-Type CuI with Significant Enhanced Performance for Advanced Thermoelectric Applications. ACS Applied Energy Materials, 8(3), 1864-1878. https://doi.org/10.1021/acsaem.4c03130
Vancouver
Al-Fartoos MMR, Roy A, Mallick TK, Tahir AA. Engineering Dual p–n-Type CuI with Significant Enhanced Performance for Advanced Thermoelectric Applications. ACS Applied Energy Materials. 2025;8(3):1864-1878. doi:10.1021/acsaem.4c03130
BibTeX
@article{AlFartoos2025,
author = {Al-Fartoos, Mustafa Majid Rashak and Roy, Anurag and Mallick, Tapas Kumar and Tahir, Asif Ali},
title = {Engineering Dual p–n-Type CuI with Significant Enhanced Performance for Advanced Thermoelectric Applications},
journal = {ACS Applied Energy Materials},
year = {2025},
volume = {8},
number = {3},
pages = {1864--1878},
doi = {10.1021/acsaem.4c03130}
}
EUVIMED