Influence of Commercial Ionomers and Membranes on a PGM-Free Catalyst in the Alkaline Oxygen Reduction
ACS Applied Energy Materials · 24.03.2025 · 8 (6) · 3470-3480
DOI: 10.1021/acsaem.4c02929 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 06.03.2025. Verfasst von Simon Kellner und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Imperial College London, London SW7 2AZ, United Kingdom. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UK Research and Innovation, Royal Academy of Engineering, Horizon 2020 Framework Programme.
Abstract (Originalsprache)
Hitherto, research into alkaline exchange membrane fuel cells lacked a commercial benchmark anionomer and membrane, analogous to Nafion in proton-exchange membrane fuel cells. Three commercial alkaline exchange ionomers (AEIs) have been scrutinized for that role in combination with a commercial platinum-group-metal-free Fe-N-C (Pajarito Powder) catalyst for the cathode. The initial rotating disc electrode benchmarking of the Fe-N-C catalyst's oxygen reduction reaction activity using Nafion in an alkaline electrolyte seems to neglect the restricted oxygen diffusion in the AEIs and is recommended to be complemented by measurements with the same AEI as used in the alkaline exchange membrane fuel cell (AEMFC) testing. Evaluation of the catalyst layer in a gas-diffusion electrode setup offers a way to assess the performance in realistic operating conditions, without the additional complications of device-level water management. Blending of a porous Fe-N-C catalyst with different types of AEI yields catalyst layers with different pore size distributions. The catalyst layer with Piperion retains the highest proportion of the original BET surface area of the Fe-N-C catalyst. The water adsorption capacity is also influenced by the AEI, with Fumion FAA-3 and Piperion having equally high capabilities surpassing Sustainion. Finally, the choice of the membrane influences the ORR performance as well; particularly, the low hydroxide conductivity of Fumion FAA-3 in the room temperature experiments mitigates the ORR performance irrespective of the AEI in the catalyst layer. The best overall performance at high current densities is shown by the Piperion anion exchange ionomer matched with Sustainion X37-50 membrane.
Autor:innen und Institutionen
- Department of Chemical Engineering, Imperial College London, London SW7 2AZ, United Kingdom.
- Department of Materials, Royal School of Mines, Imperial College London, London SW7 2AZ, United Kingdom.
- Advanced Institute for Materials Research (WPI-AIMR), Tohoku University 2-1-1 Katahira, Aobaku, Sendai, Miyagi 980-8577, Japan.
ORCID-Profile: Angus Pedersen, Jesús Barrio, Sandrine Heutz, Ifan E L Stephens, Silvia Favero, Maria-Magdalena Titirici
Förderung
- UK Research and Innovation
- Royal Academy of Engineering
- Horizon 2020 Framework Programme
- Education, Research and Innovation
Zitieren
APA
Kellner, S., Liu, Z., D'Acierno, F., Pedersen, A., Barrio, J., Heutz, S., Stephens, I. E. L., Favero, S., & Titirici, M. M. (2025). Influence of Commercial Ionomers and Membranes on a PGM-Free Catalyst in the Alkaline Oxygen Reduction. ACS Applied Energy Materials, 8(6), 3470-3480. https://doi.org/10.1021/acsaem.4c02929
Vancouver
Kellner S, Liu Z, D'Acierno F, Pedersen A, Barrio J, Heutz S, et al. Influence of Commercial Ionomers and Membranes on a PGM-Free Catalyst in the Alkaline Oxygen Reduction. ACS Applied Energy Materials. 2025;8(6):3470-3480. doi:10.1021/acsaem.4c02929
BibTeX
@article{Kellner2025,
author = {Kellner, Simon and Liu, Ziyang and D'Acierno, Francesco and Pedersen, Angus and Barrio, Jesús and Heutz, Sandrine and Stephens, Ifan E L and Favero, Silvia and Titirici, Maria-Magdalena},
title = {Influence of Commercial Ionomers and Membranes on a PGM-Free Catalyst in the Alkaline Oxygen Reduction},
journal = {ACS Applied Energy Materials},
year = {2025},
volume = {8},
number = {6},
pages = {3470--3480},
doi = {10.1021/acsaem.4c02929}
}
EUVIMED