EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reducing Thermal Degradation of Perovskite Solar Cells during Vacuum Lamination by Internal Diffusion Barriers

Robert Witteck iD, Duong Nguyen Minh, Goutam Paul, Steven P Harvey iD, Xiaopeng Zheng iD, Qi Jiang iD, Min Chen, Tobias Abzieher, Axel F Palmstrom iD, Brian Habersberger, E Ashley Gaulding, Joseph M Luther iD und 1 weitere

ACS Applied Energy Materials · 25.11.2024 · 7 (22) · 10750-10757

DOI: 10.1021/acsaem.4c02567 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 07.11.2024. Verfasst von Robert Witteck und 12 weiteren Autor:innen. Beteiligte Einrichtung: National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401, United States. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Renewable Energy Laboratory, Solar Energy Technologies Office.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current photovoltaic (PV) panels typically contain interconnected solar cells that are vacuum laminated with a polymer encapsulant between two pieces of glass or glass with a polymer backsheet. This packaging approach is ubiquitous in conventional photovoltaic technologies such as silicon and thin-film solar modules, contributing to thermal management, mechanical reinforcement, and environmental protection to enable the long lifetimes necessary to become financially acceptable. Commercial vacuum lamination processes typically occur at 150 °C to ensure cross-linking and/or glass bonding of the encapsulant to the glass and PV cells. Perovskite solar cells (PSCs) have emerged as a promising next-generation PV technology that is known to degrade under thermal stresses, especially at temperatures above 100 °C. In this study, we determine degradation modes during lamination and engineer internal diffusion barriers within the PSC to withstand the harsh thermal conditions of vacuum lamination. PSCs with self-assembled monolayers at the ITO interface and SnO X layers deposited by atomic layer deposition at the electron extraction side of the device endured vacuum lamination at conditions typical of commercial PV processes (150 °C) without degradation. This work demonstrates that perovskite PV can be integrated into the existing module lamination process, enabling future single- and multijunction modules utilizing perovskite absorbers.

Autor:innen und Institutionen

  • National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401, United States.
  • The Dow Chemical Company, 230 Abner Jackson Pkwy, Lake Jackson, Texas 77566, United States.

ORCID-Profile: Robert Witteck, Steven P Harvey, Xiaopeng Zheng, Qi Jiang, Axel F Palmstrom, Joseph M Luther, Lance M Wheeler

Förderung

  • National Renewable Energy Laboratory
  • Solar Energy Technologies Office

Zitieren

APA

Witteck, R., Nguyen Minh, D., Paul, G., Harvey, S. P., Zheng, X., Jiang, Q., Chen, M., Abzieher, T., Palmstrom, A. F., Habersberger, B., Gaulding, E. A., Luther, J. M., & Wheeler, L. M. (2024). Reducing Thermal Degradation of Perovskite Solar Cells during Vacuum Lamination by Internal Diffusion Barriers. ACS Applied Energy Materials, 7(22), 10750-10757. https://doi.org/10.1021/acsaem.4c02567

Vancouver

Witteck R, Nguyen Minh D, Paul G, Harvey SP, Zheng X, Jiang Q, et al. Reducing Thermal Degradation of Perovskite Solar Cells during Vacuum Lamination by Internal Diffusion Barriers. ACS Applied Energy Materials. 2024;7(22):10750-10757. doi:10.1021/acsaem.4c02567

BibTeX
@article{Witteck2024,
  author = {Witteck, Robert and Nguyen Minh, Duong and Paul, Goutam and Harvey, Steven P and Zheng, Xiaopeng and Jiang, Qi and Chen, Min and Abzieher, Tobias and Palmstrom, Axel F and Habersberger, Brian and Gaulding, E Ashley and Luther, Joseph M and Wheeler, Lance M},
  title = {Reducing Thermal Degradation of Perovskite Solar Cells during Vacuum Lamination by Internal Diffusion Barriers},
  journal = {ACS Applied Energy Materials},
  year = {2024},
  volume = {7},
  number = {22},
  pages = {10750--10757},
  doi = {10.1021/acsaem.4c02567}
}
Kostenlos starten →