EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Quasi-Solid-State Polymer Lithium–Metal Battery with Minimal Excess Lithium, Ultrathin Separator, and High-Mass Loading NMC811 Cathode

Gerrit Homann, Qing Wang iD, Sufu Liu, Antoine Devincenti, Pranav Karanth, Mark Weijers, Fokko M Mulder iD, Matiss Piesins, Tom Gouveia, Alix Ladam iD, Sebastien Fantini, Corsin Battaglia iD

ACS Applied Energy Materials · 11.11.2024 · 7 (21) · 10037-10043

DOI: 10.1021/acsaem.4c02099 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 31.10.2024. Verfasst von Gerrit Homann und 11 weiteren Autor:innen. Beteiligte Einrichtung: Empa-Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, 8600 Dübendorf, Switzerland. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 LEIT Advanced Materials.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid-state batteries with lithium metal anodes are considered the next major technology leap with respect to today's lithium-ion batteries, as they promise a significant increase in energy density. Expectations for solid-state batteries from the automotive and aviation sectors are high, but their implementation in industrial production remains challenging. Here, we report a solid-state lithium-metal battery enabled by a polymer electrolyte consisting of a poly(DMADAFSI) cationic polymer and LiFSI in Pyr13FSI as plasticizer. The polymer electrolyte is infiltrated and solidified in the pores of a commercial LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode with up to 2.8 mAh cm-2 nominal areal capacity and in the pores of a 25 μm thin commercial polypropylene separator. Cathode and separator are finally laminated into a cell in combination with a commercial 20 μm thin lithium metal anode. Our demonstration of a solid-state polymer battery cycling at full nominal capacity employing exclusively commercially available components available at industrial scale represents a critical step forward toward the commercialization of a competitive all-solid-state battery technology.

Autor:innen und Institutionen

  • Empa-Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, 8600 Dübendorf, Switzerland.
  • Delft University of Technology, Chemical Engineering Department, Van der Maasweg 9, Delft 2629HZ, The Netherlands.
  • Sidrabe Vacuum, Krustpils Iela 17, Riga 1073, Latvia.
  • Solvionic, 11 Chemin des Silos, Toulouse 31100, France.
  • ETH Zurich, Department of Information Technology and Electrical Engineering, Gloriastrasse 35, 8092 Zürich, Switzerland.
  • EPFL, School of Engineering, Institute of Materials, Station 7, 1015 Lausanne, Switzerland.

ORCID-Profile: Qing Wang, Fokko M Mulder, Alix Ladam, Corsin Battaglia

Förderung

  • H2020 LEIT Advanced Materials

Zitieren

APA

Homann, G., Wang, Q., Liu, S., Devincenti, A., Karanth, P., Weijers, M., Mulder, F. M., Piesins, M., Gouveia, T., Ladam, A., Fantini, S., & Battaglia, C. (2024). A Quasi-Solid-State Polymer Lithium–Metal Battery with Minimal Excess Lithium, Ultrathin Separator, and High-Mass Loading NMC811 Cathode. ACS Applied Energy Materials, 7(21), 10037-10043. https://doi.org/10.1021/acsaem.4c02099

Vancouver

Homann G, Wang Q, Liu S, Devincenti A, Karanth P, Weijers M, et al. A Quasi-Solid-State Polymer Lithium–Metal Battery with Minimal Excess Lithium, Ultrathin Separator, and High-Mass Loading NMC811 Cathode. ACS Applied Energy Materials. 2024;7(21):10037-10043. doi:10.1021/acsaem.4c02099

BibTeX
@article{Homann2024,
  author = {Homann, Gerrit and Wang, Qing and Liu, Sufu and Devincenti, Antoine and Karanth, Pranav and Weijers, Mark and Mulder, Fokko M and Piesins, Matiss and Gouveia, Tom and Ladam, Alix and Fantini, Sebastien and Battaglia, Corsin},
  title = {A Quasi-Solid-State Polymer Lithium–Metal Battery with Minimal Excess Lithium, Ultrathin Separator, and High-Mass Loading NMC811 Cathode},
  journal = {ACS Applied Energy Materials},
  year = {2024},
  volume = {7},
  number = {21},
  pages = {10037--10043},
  doi = {10.1021/acsaem.4c02099}
}
Kostenlos starten →