Hexagonal h-WO3 Nanorod-Based Conductometric Sensor for Trace-Level Hydrogen Sulfide Detection
ACS Applied Electronic Materials · 17.11.2026
DOI: 10.1021/acsaelm.6c02281 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 17.11.2026. Verfasst von Sarah Ben Haj Fraj und 6 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: H2020 Marie Sklodowska-Curie Actions, NextGenerationEU.
Abstract (Originalsprache)
Hydrogen sulfide (H2S) is a highly toxic and corrosive gas commonly present in landfill emissions and industrial environments, posing serious risks to human health and the environment even at trace concentrations. Therefore, the development of a sensitive, reliable, and robust H2S sensor is of outmost importance today. In this work, hexagonal tungsten oxide (h-WO3) nanorods were synthesized via a simple and cost-effective hydrothermal method and investigated as a sensitive and selective sensing material for H2S detection. The structural, morphological, and compositional properties of the synthesized h-WO3 were systematically characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results confirmed the formation of phase-pure, highly crystalline hexagonal WO3 with a one-dimensional nanorod morphology and a porous, interconnected network favorable for gas-sensing applications. Gas-sensing measurements revealed that the fabricated conductometric h-WO3 sensor exhibited a remarkable response toward H2S at an optimal operating temperature of 200 °C, achieving a high response value (Ra/Rg) of 51.6 at 4 ppm and detecting concentrations as low as 0.15 ppm. The sensor demonstrated fast response and recovery times, excellent repeatability, good long-term stability, and outstanding selectivity against common interfering gases such as NH3, CO2, CO, SO2, and NO2. The superior sensing performance is attributed to the high surface area, porous nanorod architecture, and enhanced surface reactivity of h-WO3.
Förderung
- H2020 Marie Sklodowska-Curie Actions
- NextGenerationEU
Zitieren
APA
Fraj, S. B. H., Viter, R., Zabolotnii, V., Sahul, M., Čaplovičová, M., Kozak, A., & Neri, G. (2026). Hexagonal h-WO3 Nanorod-Based Conductometric Sensor for Trace-Level Hydrogen Sulfide Detection. ACS Applied Electronic Materials. https://doi.org/10.1021/acsaelm.6c02281
Vancouver
Fraj SBH, Viter R, Zabolotnii V, Sahul M, Čaplovičová M, Kozak A, et al. Hexagonal h-WO3 Nanorod-Based Conductometric Sensor for Trace-Level Hydrogen Sulfide Detection. ACS Applied Electronic Materials. 2026. doi:10.1021/acsaelm.6c02281
BibTeX
@article{Fraj2026,
author = {Fraj, Sarah Ben Haj and Viter, Roman and Zabolotnii, Viktor and Sahul, Martin and Čaplovičová, Mária and Kozak, Andrii and Neri, Giovanni},
title = {Hexagonal h-WO3 Nanorod-Based Conductometric Sensor for Trace-Level Hydrogen Sulfide Detection},
journal = {ACS Applied Electronic Materials},
year = {2026},
doi = {10.1021/acsaelm.6c02281}
}
EUVIMED