EUVIMEDEUVIMED entdecken
Crossref

Machine-Learning-Assisted Signal Interpretation in a Dual-Architecture Polyvinyl Alcohol/Tellurium/Selenium Sensing Platform for Drift-Tolerant Humidity Monitoring and Tactile Classification

Sheik Abdur Rahman, Junwon Jang, Seung-Hwan Lee, Yong-Wook Jeong, Seyeon Im, Jeong Ho Ryu, Da Wan Kim, Yong Jin Jeong

ACS Applied Electronic Materials · 09.11.2026

DOI: 10.1021/acsaelm.6c02267 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 09.11.2026. Verfasst von Sheik Abdur Rahman und 7 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Ministry of Education, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chemical oxidation and viscoelastic deformation can cause substantial signal drift and time-dependent responses in soft wearable sensors, limiting their long-term reliability. Here, we present a machine-learning-assisted signal interpretation framework using a common polyvinyl alcohol (PVA)/tellurium (Te) nanowire/selenium (Se) nanoparticle composite configured into two sensor architectures: an unencapsulated thin-film humidity sensor and a porous piezoresistive pressure sensor. The unencapsulated humidity sensor exhibited severe oxidation-induced ambient aging over 115 days, including a substantial chemical baseline resistance shift and more than 96% loss in raw response. By applying fractional normalization and few-shot XGBoost calibration, functional classification of aged humidity-related signals was partially recovered, achieving 77.3% accuracy on degraded sensor data. In a separate porous pressure-sensing architecture, compression-induced current responses were obtained above an activation threshold of approximately 191 kPa, and LSTM analysis enabled classification of time-series mechanical signals with 98.7% accuracy. These results suggest that algorithmic calibration and time-series learning can extend the functional usability of degraded or mechanically compliant soft sensors, although future work is required to demonstrate fully integrated dual-modal operation and cross-sensitivity suppression.

Förderung

  • Ministry of Education
  • National Research Foundation of Korea

Zitieren

APA

Rahman, S. A., Jang, J., Lee, S., Jeong, Y., Im, S., Ryu, J. H., Kim, D. W., & Jeong, Y. J. (2026). Machine-Learning-Assisted Signal Interpretation in a Dual-Architecture Polyvinyl Alcohol/Tellurium/Selenium Sensing Platform for Drift-Tolerant Humidity Monitoring and Tactile Classification. ACS Applied Electronic Materials. https://doi.org/10.1021/acsaelm.6c02267

Vancouver

Rahman SA, Jang J, Lee S, Jeong Y, Im S, Ryu JH, et al. Machine-Learning-Assisted Signal Interpretation in a Dual-Architecture Polyvinyl Alcohol/Tellurium/Selenium Sensing Platform for Drift-Tolerant Humidity Monitoring and Tactile Classification. ACS Applied Electronic Materials. 2026. doi:10.1021/acsaelm.6c02267

BibTeX
@article{Rahman2026,
  author = {Rahman, Sheik Abdur and Jang, Junwon and Lee, Seung-Hwan and Jeong, Yong-Wook and Im, Seyeon and Ryu, Jeong Ho and Kim, Da Wan and Jeong, Yong Jin},
  title = {Machine-Learning-Assisted Signal Interpretation in a Dual-Architecture Polyvinyl Alcohol/Tellurium/Selenium Sensing Platform for Drift-Tolerant Humidity Monitoring and Tactile Classification},
  journal = {ACS Applied Electronic Materials},
  year = {2026},
  doi = {10.1021/acsaelm.6c02267}
}
Kostenlos starten →