Maskless Femtosecond-Laser Micromachining of Recessed Gates in β-Ga2O3 MOSFETs
ACS Applied Electronic Materials · 17.11.2026
DOI: 10.1021/acsaelm.6c01677 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 17.11.2026. Verfasst von Justinas Jorudas und 11 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lietuvos Mokslo Taryba, HORIZON EUROPE Marie Sklodowska-Curie Actions, National Science and Technology Council.
Abstract (Originalsprache)
Maskless patterning routes that enable rapid, flexible prototyping of ultra-wide-bandgap transistors are highly desirable for accelerating the development of beta-phase gallium oxide (β-Ga2O3) electronics. Here, we present the first demonstration of maskless femtosecond-laser micromachining (fs-LM) utilized as a lithography-free approach to fabricate recessed gates in β-Ga2O3 MOSFETs. Controlled gate-recess depths are realized directly within the epitaxial channel and incorporated into functional transistors. Cross-sectional HR-TEM and EDS depth profiling within the gate region confirm the structural integrity of the underlying layer stack and show conformal HfO2 gate dielectric deposition over the laser-processed surface. However, SEM and AFM analyses reveal void formation and surface roughness within the recesses, which contribute to an elevated drain-induced barrier lowering (DIBL ≈ 716 mV/V) compared to a conventionally fabricated ICP-RIE reference device (DIBL ≈ 369 mV/V). While further optimization of the laser and post-processing parameters is required to mitigate laser-induced defects and match the electrical performance of plasma-etched controls, these results demonstrate maskless fs-laser micromachining as a prospective route for rapid device prototyping and low-volume fabrication of recessed-gate β-Ga2O3 MOSFETs.
Förderung
- Lietuvos Mokslo Taryba
- HORIZON EUROPE Marie Sklodowska-Curie Actions
- National Science and Technology Council
Zitieren
APA
Jorudas, J., Indrišiūnas, S., Moscotin, M., Stalnionis, G., Ignatjev, I., Daugalas, T., Bičiūnas, A., Gečys, P., Chen, W., Tsou, N., Horng, R., & Kašalynas, I. (2026). Maskless Femtosecond-Laser Micromachining of Recessed Gates in β-Ga2O3 MOSFETs. ACS Applied Electronic Materials. https://doi.org/10.1021/acsaelm.6c01677
Vancouver
Jorudas J, Indrišiūnas S, Moscotin M, Stalnionis G, Ignatjev I, Daugalas T, et al. Maskless Femtosecond-Laser Micromachining of Recessed Gates in β-Ga2O3 MOSFETs. ACS Applied Electronic Materials. 2026. doi:10.1021/acsaelm.6c01677
BibTeX
@article{Jorudas2026,
author = {Jorudas, Justinas and Indrišiūnas, Simonas and Moscotin, Maxim and Stalnionis, Giedrius and Ignatjev, Ilja and Daugalas, Tomas and Bičiūnas, Andrius and Gečys, Paulius and Chen, Wei-Jhe and Tsou, Nien-Yao and Horng, Ray-Hua and Kašalynas, Irmantas},
title = {Maskless Femtosecond-Laser Micromachining of Recessed Gates in β-Ga2O3 MOSFETs},
journal = {ACS Applied Electronic Materials},
year = {2026},
doi = {10.1021/acsaelm.6c01677}
}
EUVIMED