Research on the Fabrication of Ultrafast Micro-thermocouples Using Meniscus-Confined Electrodeposition
ACS Applied Electronic Materials · 10.11.2026 · 8 (21) · 9503-9512
DOI: 10.1021/acsaelm.6c01614 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 23.10.2026. Verfasst von Xuan Liao und 8 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Sichuan Provincial Science and Technology Support Program, Southwest University of Science and Technology Undergraduate Innovation Fund Project Precision Funding Special Project.
Abstract (Originalsprache)
Precise microscale temperature sensing is important for evaluating the thermal reliability of microelectromechanical systems (MEMS), microfluidic devices, and other miniaturized systems. However, conventional lithography and vacuum-deposition-based fabrication methods are inherently limited in constructing freestanding three-dimensional (3D) thermocouple architectures. In this work, a maskless 3D additive manufacturing method based on meniscus-confined electrodeposition (MCED) is developed for the direct fabrication of Cu–Zn micro-thermocouples and sensor arrays. By spatially confining the electrochemical deposition process within a microscale meniscus, Cu and Zn microstructures can be sequentially deposited along programmed trajectories to form freestanding bimetallic thermocouple junctions without post-annealing. The fabricated Cu–Zn micro-thermocouple exhibits a response time of 7.8 ms and a Seebeck coefficient of 4.3 μV/°C, showing good agreement with the simulated thermoelectric response. A 3 × 3 micro-thermocouple array is further demonstrated for multipoint temperature measurement of a localized heat source. These results demonstrate the feasibility of MCED for the direct fabrication of spatially configurable micro-thermocouple devices and provide a flexible approach for localized and dynamic thermal sensing in miniaturized systems.
Förderung
- National Natural Science Foundation of China
- Sichuan Provincial Science and Technology Support Program
- Southwest University of Science and Technology Undergraduate Innovation Fund Project Precision Funding Special Project
- Key Laboratory of Testing Technology for Manufacturing Process, Southwest University of Science and Technology
Zitieren
APA
Liao, X., Lv, M., Teng, L., Liao, X., Cai, Y., Chen, L., Zhuang, J., Cheng, L., & Zhao, X. (2026). Research on the Fabrication of Ultrafast Micro-thermocouples Using Meniscus-Confined Electrodeposition. ACS Applied Electronic Materials, 8(21), 9503-9512. https://doi.org/10.1021/acsaelm.6c01614
Vancouver
Liao X, Lv M, Teng L, Liao X, Cai Y, Chen L, et al. Research on the Fabrication of Ultrafast Micro-thermocouples Using Meniscus-Confined Electrodeposition. ACS Applied Electronic Materials. 2026;8(21):9503-9512. doi:10.1021/acsaelm.6c01614
BibTeX
@article{Liao2026,
author = {Liao, Xuan and Lv, Mingxuan and Teng, Linxiao and Liao, Xiaobo and Cai, Yong and Chen, Long and Zhuang, Jian and Cheng, Lei and Zhao, Xinai},
title = {Research on the Fabrication of Ultrafast Micro-thermocouples Using Meniscus-Confined Electrodeposition},
journal = {ACS Applied Electronic Materials},
year = {2026},
volume = {8},
number = {21},
pages = {9503--9512},
doi = {10.1021/acsaelm.6c01614}
}
EUVIMED