Sterically Hindered Ether Diamines Enable PFAS-Free Polyimides with Ultralow Dielectric Loss
ACS Applied Electronic Materials · 11.08.2026 · 8 (15) · 6466-6480
DOI: 10.1021/acsaelm.6c00817 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 21.07.2026. Verfasst von Yi-Hsin Chang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.
Abstract (Originalsprache)
High-speed electronic interconnects require polymer dielectrics that combine ultralow dissipation factor (Df) with excellent thermal and mechanical robustness. In our previous work, the polyimide derived from 3,4′-diaminodiphenyl ether (3,4-ODA) and 1,4-phenylene bis(1,3-dioxo-1,3-dihydroisobenzofuran-5-carboxylate) (TAHQ) showed a lower dielectric loss (Df = 0.0017 at 10 GHz) than the corresponding 4,4-ODA/TAHQ polyimide (Df = 0.0023), suggesting that diamine geometry strongly influences dielectric performance. To further restrict rotational freedom around the aryl–O–aryl linkage and promote more extended chain conformations, a sterically hindered analogue of 3,4-ODA, 2-methyl-3′,4-oxydianiline (3,4-MODA), was designed and synthesized via a two-step route. DFT torsional scans of representative TAHQ/diamine/TAHQ trimer models supported this design concept by confirming the increased rotational barrier around the aryl–O–aryl linkage in the 3,4-MODA-based structure. 3,4-MODA was then incorporated into TAHQ-based polyimides by copolymerization with either 3,4-ODA or 4,4-ODA, affording the 34PI-X and 44PI-X series, where X is the mole fraction of 3,4-MODA in the diamine feed. The resulting films exhibit excellent thermal stability (Tg > 300 °C, Td5% up to ∼500 °C) and good mechanical properties. Moderate incorporation of 3,4-MODA reduced the in-plane coefficient of thermal expansion and increased birefringence, while wide-angle X-ray diffraction (WAXD) patterns suggested enhanced molecular ordering. These changes were accompanied by improved dielectric performance. In the 34PI-X series, compositions containing 25–37.5 mol% 3,4-MODA achieved an ultralow Df of 0.0011 at 10 GHz. In the 44PI-X series, Df decreased from 0.0023 to 0.0013 at 50 mol% 3,4-MODA. These results suggest that steric modulation near the ether linkage is an effective strategy for developing PFAS-free polyimides with ultralow dielectric loss for high-frequency flexible printed circuit boards (FPCBs).
Förderung
- National Science and Technology Council
Zitieren
APA
Chang, Y., Ejeta, D. D., Su, K., Shih, O., & Lin, C. (2026). Sterically Hindered Ether Diamines Enable PFAS-Free Polyimides with Ultralow Dielectric Loss. ACS Applied Electronic Materials, 8(15), 6466-6480. https://doi.org/10.1021/acsaelm.6c00817
Vancouver
Chang Y, Ejeta DD, Su K, Shih O, Lin C. Sterically Hindered Ether Diamines Enable PFAS-Free Polyimides with Ultralow Dielectric Loss. ACS Applied Electronic Materials. 2026;8(15):6466-6480. doi:10.1021/acsaelm.6c00817
BibTeX
@article{Chang2026,
author = {Chang, Yi-Hsin and Ejeta, Dula Daksa and Su, Kuan-Hsuan and Shih, Orion and Lin, Ching-Hsuan},
title = {Sterically Hindered Ether Diamines Enable PFAS-Free Polyimides with Ultralow Dielectric Loss},
journal = {ACS Applied Electronic Materials},
year = {2026},
volume = {8},
number = {15},
pages = {6466--6480},
doi = {10.1021/acsaelm.6c00817}
}
EUVIMED