Fast Prototyping of Thin-Film Polyimide Electrodes for Neural Interfacing: Tantalum Metallization as an Alternative to Noble Metals
ACS Applied Electronic Materials · 10.06.2025 · 7 (11) · 5115-5125
DOI: 10.1021/acsaelm.5c00534 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 27.05.2025. Verfasst von Evgeny A. Kelm und 17 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 17 Literaturangaben. Gefördert von: Lomonosov Moscow State University.
Abstract (Originalsprache)
Thin-film electrodes represent a promising approach for developing safe and stable brain–computer interfaces (BCIs). This study presents a method for fabricating thin-film electrodes that incorporates laser processing of metal films sputtered onto a polyimide base. This method is cheaper and faster and allows for rapid design changes and prototyping compared to traditional approaches, such as lithography. The electrodes can be adapted for both stimulation and recording, and their geometrical design can be modified for various applications including brain electrocorticography arrays, penetrating probes, and wrappings around peripheral nerves, among others. Electrodes can be designed and fabricated from scratch within 3 days, with an estimated cost of a single electrode around $1. Using this method, 12 μm thin electrodes can be produced and the contact size can be minimized to approximately 20 μm. Also, this study introduced the use of tantalum as the conductive layer. Tantalum serves as a cost-effective alternative to noble metals and improves electrode resistance to delamination, thereby enhancing the long-term reliability. Additionally, a platinum coating was used to tailor the electrochemical properties of tantalum, making them comparable to those of pure noble metal electrodes. The safety of the electrodes fabricated using this method was thoroughly evaluated. The electrodes were found to be safe for surrounding tissues, even in long-term, high-mobility applications. Histological examination of rat sciatic nerves after six months of implantation showed no signs of serious tissue damage.
Förderung
- Lomonosov Moscow State University
Zitieren
APA
Kelm, E. A., Makievskaya, C. I., Brezgunova, A. A., Andrianova, N. V., Naumova, G. M., Laurinavichyute, V. K., Solovyova, M. E., Bolotov, E. A., Bochkov, E. I., Zeinalova, A. K., Gancharova, O. S., Plotnikov, E. Y., Evdokimov, P. V., Kik, M. A., Petrov, A. K., Grunin, A. A., Lebedev, M. A., & Popkov, V. A. (2025). Fast Prototyping of Thin-Film Polyimide Electrodes for Neural Interfacing: Tantalum Metallization as an Alternative to Noble Metals. ACS Applied Electronic Materials, 7(11), 5115-5125. https://doi.org/10.1021/acsaelm.5c00534
Vancouver
Kelm EA, Makievskaya CI, Brezgunova AA, Andrianova NV, Naumova GM, Laurinavichyute VK, et al. Fast Prototyping of Thin-Film Polyimide Electrodes for Neural Interfacing: Tantalum Metallization as an Alternative to Noble Metals. ACS Applied Electronic Materials. 2025;7(11):5115-5125. doi:10.1021/acsaelm.5c00534
BibTeX
@article{Kelm2025,
author = {Kelm, Evgeny A. and Makievskaya, Ciara I. and Brezgunova, Anna A. and Andrianova, Nadezda V. and Naumova, Gelena M. and Laurinavichyute, Veronika K. and Solovyova, Maria E. and Bolotov, Evgenii A. and Bochkov, Evgenii I. and Zeinalova, Alina K. and Gancharova, Olga S. and Plotnikov, Egor Y. and Evdokimov, Pavel V. and Kik, Mikhail A. and Petrov, Alexander K. and Grunin, Andrey A. and Lebedev, Mikhail A. and Popkov, Vasily A.},
title = {Fast Prototyping of Thin-Film Polyimide Electrodes for Neural Interfacing: Tantalum Metallization as an Alternative to Noble Metals},
journal = {ACS Applied Electronic Materials},
year = {2025},
volume = {7},
number = {11},
pages = {5115--5125},
doi = {10.1021/acsaelm.5c00534}
}
EUVIMED