EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Boundary Resistance Reduction by Interfacial Nanopatterning for GaN-on-Diamond Electronics Applications

Xiaoyang Ji, Sai Charan Vanjari iD, Daniel Francis, Jerome A Cuenca iD, Arpit Nandi iD, David Cherns iD, Oliver A Williams iD, Felix Ejeckam, James W Pomeroy, Martin Kuball iD

ACS Applied Electronic Materials · 08.04.2025 · 7 (7) · 2939-2946

DOI: 10.1021/acsaelm.5c00119 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 27.03.2025. Verfasst von Xiaoyang Ji und 9 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Device Thermography and Reliability (CDTR), University of Bristol, Bristol BS8 1TL, U.K. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

GaN high electron mobility transistors (HEMTs) on SiC substrates are the highest performing commercially available transistors for high-power, high-frequency applications. However, Joule self-heating limits the maximum areal power density, i.e., operating power is derated to ensure the lifetime of GaN-based devices. Diamond is attractive as a heat sink due to its record-high thermal conductivity combined with its high electrical resistivity. GaN-on-diamond devices have been demonstrated, bringing the diamond as close as possible to the active device area. The GaN/diamond interface, close to the channel heat source, needs to efficiently conduct high heat fluxes, but it can present a significant thermal boundary resistance (TBR). In this work, we implement nanoscale trenches between GaN and diamond to explore new strategies for reducing the effective GaN/diamond TBR (TBReff). A 3× reduction in GaN/diamond TBReff was achieved using this approach, which is consistent with the increased contact area; thermal properties were measured using nanosecond transient thermoreflectance (ns-TTR). In addition, the SiN x dielectric interlayer between the GaN and diamond increased its thermal conductivity by 2× through annealing, further reducing the TBR. This work demonstrates that the thermal resistance of heterogeneous interfaces can be optimized by nanostructured patterning and high-temperature annealing, which paves the way for enhanced thermal management in future device applications.

Autor:innen und Institutionen

  • Centre for Device Thermography and Reliability (CDTR), University of Bristol, Bristol BS8 1TL, U.K.
  • Akash Systems, San Francisco, California 94108, United States.
  • Cardiff School of Physics and Astronomy, Cardiff University, Cardiff CF24 3AA, U.K.

ORCID-Profile: Sai Charan Vanjari, Jerome A Cuenca, Arpit Nandi, David Cherns, Oliver A Williams, Martin Kuball

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Ji, X., Vanjari, S. C., Francis, D., Cuenca, J. A., Nandi, A., Cherns, D., Williams, O. A., Ejeckam, F., Pomeroy, J. W., & Kuball, M. (2025). Thermal Boundary Resistance Reduction by Interfacial Nanopatterning for GaN-on-Diamond Electronics Applications. ACS Applied Electronic Materials, 7(7), 2939-2946. https://doi.org/10.1021/acsaelm.5c00119

Vancouver

Ji X, Vanjari SC, Francis D, Cuenca JA, Nandi A, Cherns D, et al. Thermal Boundary Resistance Reduction by Interfacial Nanopatterning for GaN-on-Diamond Electronics Applications. ACS Applied Electronic Materials. 2025;7(7):2939-2946. doi:10.1021/acsaelm.5c00119

BibTeX
@article{Ji2025,
  author = {Ji, Xiaoyang and Vanjari, Sai Charan and Francis, Daniel and Cuenca, Jerome A and Nandi, Arpit and Cherns, David and Williams, Oliver A and Ejeckam, Felix and Pomeroy, James W and Kuball, Martin},
  title = {Thermal Boundary Resistance Reduction by Interfacial Nanopatterning for GaN-on-Diamond Electronics Applications},
  journal = {ACS Applied Electronic Materials},
  year = {2025},
  volume = {7},
  number = {7},
  pages = {2939--2946},
  doi = {10.1021/acsaelm.5c00119}
}
Kostenlos starten →