Enhancing Osteogenic Response in Selective Laser Melting-Fabricated Titanium through Hierarchical Micro/Nano Surface Engineering via Acid and Iodine Treatments
ACS Applied Bio Materials · 08.11.2026
DOI: 10.1021/acsabm.6c01470 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Bio Materials, online erschienen am 08.11.2026. Verfasst von Mahmoud Gallab und 6 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Sciences Department, Chubu University, Kasugai4878501, Japan. Die Arbeit nennt 45 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Selective laser melting (SLM) enables the fabrication of patient-specific titanium (Ti) implants with complex geometries. However, the as-built SLM-Ti surfaces retain partially melted particles that may hinder favorable cellular responses. Because surface topography plays a critical role in regulating osteogenic cell behavior, controlled surface modification is needed to optimize these responses. In this study, SLM-Ti samples were treated with a mixed-acid solution for 1, 3, or 6 h (designated A1, A3, and A6, respectively) to regulate their macro- and microtopography. Surface characteristics were quantified using conventional roughness parameters (Ra and Rz) and fractal dimension (Df), which provided a quantitative measure of hierarchical surface complexity and guided surface optimization. The responses of MC3T3-E1 preosteoblasts to untreated and acid-treated samples were assessed by measuring cell proliferation, alkaline phosphatase (ALP) activity, and extracellular matrix mineralization. Among the acid-treated groups, A1 (Ra = 9.3 μm; Df = 1.187) showed the most favorable combination of cell proliferation and ALP activity, indicating enhanced early osteogenic differentiation. Accordingly, A1 was selected as the optimal macro-/microstructured surface for subsequent hierarchical modification. The A1 surface was then subjected to sequential NaOH–CaCl2–heat–ICl3 treatment to produce the A1-Io surface, which contained an iodine-containing calcium-deficient calcium titanate nanostructured layer superimposed on the microstructured surface. This hierarchical macro-/micro-/nanoarchitecture increased Df to 1.359, reflecting greater multiscale surface complexity. Compared with A1 alone, A1-Io enhanced late-stage extracellular matrix mineralization and further improved cell proliferation and ALP activity. These findings demonstrate that controlled acid etching followed by iodine treatment provides a quantitatively guided strategy for enhancing the osteogenic performance of SLM-fabricated titanium implants.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Biomedical Sciences Department, Chubu University, Kasugai4878501, Japan.
- Faculty of Engineering, Minia University, Minia61111, Egypt.
- Institute of Biology, Vietnam Academy of Science and Technology, Hanoi100000, Vietnam.
- University of Science and Technology of Hanoi, Vietnam Academy of Science and Technology, Hanoi100000, Vietnam.
- Osaka Yakin Kogyo Co., Ltd., Higashi Yodogawa-ku, Osaka5330005, Japan.
ORCID-Profile: Mahmoud Gallab
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Gallab, M., Thi Minh Le, P., Shintani, S. A., Ito, M., Matsushita, T., Kitagaki, H., & Yamaguchi, S. (2026). Enhancing Osteogenic Response in Selective Laser Melting-Fabricated Titanium through Hierarchical Micro/Nano Surface Engineering via Acid and Iodine Treatments. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.6c01470
Vancouver
Gallab M, Thi Minh Le P, Shintani SA, Ito M, Matsushita T, Kitagaki H, et al. Enhancing Osteogenic Response in Selective Laser Melting-Fabricated Titanium through Hierarchical Micro/Nano Surface Engineering via Acid and Iodine Treatments. ACS Applied Bio Materials. 2026. doi:10.1021/acsabm.6c01470
BibTeX
@article{Gallab2026,
author = {Gallab, Mahmoud and Thi Minh Le, Phuc and Shintani, Seine A and Ito, Morihiro and Matsushita, Tomiharu and Kitagaki, Hisashi and Yamaguchi, Seiji},
title = {Enhancing Osteogenic Response in Selective Laser Melting-Fabricated Titanium through Hierarchical Micro/Nano Surface Engineering via Acid and Iodine Treatments},
journal = {ACS Applied Bio Materials},
year = {2026},
doi = {10.1021/acsabm.6c01470}
}
EUVIMED