EUVIMEDEUVIMED entdecken
Crossref

Tuning Hopeite-Phase Dominant Phosphate Coating with Dy-Doped MoS2 for Improved Antibacterial Surface Protection

Chanassery Vinayababu Geethanjali, Liju Elias iD, Babu Indira Bijimol, Najiya Nasirin iD, Anaswara Anil iD, Sheik Muhammadhu Aboobakar Shibli iD

ACS Applied Bio Materials · 2026

DOI: 10.1021/acsabm.6c01096 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Bio Materials, 2026. Verfasst von Chanassery Vinayababu Geethanjali und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, University of Kerala, Kariavattom Campus, Thiruvananthapuram, Kerala695 581, India. Hauptthemen laut MEDLINE: Molybdenum, Anti-Bacterial Agents, Disulfides, Phosphates. Die Arbeit nennt 65 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The susceptibility of steel toward biologically aggressive environments necessitates the need for engineering systems yielding antibacterial efficiency and biocorrosion resistance. This study presents design and fabrication of multifunctional phosphate coating matrix integrated with physiochemically tailored dysprosium-doped MoS2 (3% Dy-doped MoS2) nanoparticles for enhanced antibacterial and anticorrosion performance. The superior biocidal activity of tuned Dy-doped MoS2 arises from the contact-killing effect of hierarchical cauliflower nanostructures and ROS-induced stress enabled by the tuned band gap (1.65 eV) of 3% Dy-doped MoS2. The tailored nanoparticle integration into the phosphate bath influences the crystallization kinetics, resulting in the development of a dense hopeite (Zn2(PO4)2.4H2O)-rich layer in tuned 3% Dy-doped MoS2-based zinc phosphate composite (0.3DyM-ZPC) coating. The microstructurally tuned 0.3DyM-ZPC coating exhibits enhanced hydrophobicity (∼115°), limiting wettability, and microbial adhesion. The corrosion resistance performance was significantly enhanced, with the 0.3DyM-ZPC coating exhibiting lowest corrosion current density (326.7 µA/cm2) and corrosion rate (2.07 × 10–2 mmpy), owing to the improved barrier protection. The 0.3DyM-ZPC coating demonstrate substantial decrease in bacterial survivability (24.20, 21.62, and 17.79%) against different bacterial inoculums. Long duration bacterial immersion studies (28 days) revealed minimum biofilm formation and predominant dead bacterial cells on the tuned DyM-ZPC coating surface.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MolybdenumAnti-Bacterial AgentsDisulfidesPhosphatesCoated Materials, BiocompatibleSurface PropertiesMaterials TestingMicrobial Sensitivity TestsParticle SizeEscherichia coliZinc CompoundsStaphylococcus aureusCorrosion

Stichwörter der Autor:innen

Dy-doped MoS2Hopeite-phase dominantROSantimicrobialbiocorrosion resistancenanoparticles

Substanzen

MolybdenumAnti-Bacterial AgentsDisulfidesPhosphatesmolybdenum disulfideCoated Materials, BiocompatibleZinc Compounds

Autor:innen und Institutionen

  • Department of Chemistry, University of Kerala, Kariavattom Campus, Thiruvananthapuram, Kerala695 581, India.

ORCID-Profile: Liju Elias, Najiya Nasirin, Anaswara Anil, Sheik Muhammadhu Aboobakar Shibli

Zitieren

APA

Geethanjali, C. V., Elias, L., Bijimol, B. I., Nasirin, N., Anil, A., & Shibli, S. M. A. (2026). Tuning Hopeite-Phase Dominant Phosphate Coating with Dy-Doped MoS2 for Improved Antibacterial Surface Protection. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.6c01096

Vancouver

Geethanjali CV, Elias L, Bijimol BI, Nasirin N, Anil A, Shibli SMA. Tuning Hopeite-Phase Dominant Phosphate Coating with Dy-Doped MoS2 for Improved Antibacterial Surface Protection. ACS Applied Bio Materials. 2026. doi:10.1021/acsabm.6c01096

BibTeX
@article{Geethanjali2026,
  author = {Geethanjali, Chanassery Vinayababu and Elias, Liju and Bijimol, Babu Indira and Nasirin, Najiya and Anil, Anaswara and Shibli, Sheik Muhammadhu Aboobakar},
  title = {Tuning Hopeite-Phase Dominant Phosphate Coating with Dy-Doped MoS2 for Improved Antibacterial Surface Protection},
  journal = {ACS Applied Bio Materials},
  year = {2026},
  doi = {10.1021/acsabm.6c01096}
}
Kostenlos starten →