One-Step Pulsed Electrodeposition of ZnO/ZnP Composite Coatings on Titanium Implants for Enhanced Antibacterial Activity and Biocompatibility
ACS Applied Bio Materials · 06.04.2026 · 9 (7) · 3668-3680
DOI: 10.1021/acsabm.6c00148 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Bio Materials, online erschienen am 19.03.2026. Verfasst von Junchong Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, PR China. Hauptthemen laut MEDLINE: Zinc Oxide, Anti-Bacterial Agents, Titanium, Coated Materials, Biocompatible. Die Arbeit nennt 61 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Guangdong Province.
Abstract (Originalsprache)
Titanium implants are widely used in orthopedic and dental applications. However, bacterial adhesion and subsequent biofilm formation on Ti surfaces remain critical challenges, often leading to implant-associated infections. Although zinc oxide (ZnO) provides broad‑spectrum antibacterial activity, excessive Zn2+ release may induce cytotoxicity, and many zinc‑containing coatings still rely on complex multistep conversion routes or zinc‑based substrates. In this study, a ZnO/zinc-phosphate (ZnP) composite coating was successfully constructed on Ti substrates via a one-step pulse electrodeposition method. Compared with conventional multistep conversion routes, this method employs only two precursor salts and a single electrolyte bath to achieve rapid (15 min), one-step in situ deposition on Ti. By avoiding post-conversion reactions and repeated post-treatments, the process substantially simplifies the overall fabrication workflow. The composite achieves multifunctionality through a ZnO−ZnP synergy: ZnO delivers rapid antibacterial action, while the ZnP phase seals pores within the ZnO matrix and serves as a barrier, enabling controlled Zn2+ release (25% lower cumulative release at day 14). This densified composite structure delivered the highest corrosion resistance across all samples and promoted bioactivity, evidenced by dense apatite formation after immersion. In addition, ALP activity increased to 34.8 U/L at day 14 and CCK-8 assays showed the highest cell viability, demonstrating improved osteogenic potential and cytocompatibility. Furthermore, the coating showed effective antibacterial activity against Escherichia coli (E. coli) (96.2%) and Staphylococcus aureus (S. aureus) (89.8%), thereby effectively reducing the risk of clinical infections. This work provides a facile and efficient strategy for the one-step construction of multifunctional antibacterial coatings on metallic implants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, PR China.
- Guangzhou Key Laboratory for Clinical Rapid Diagnosis and Early Warning of Infectious Diseases, KingMed School of Laboratory Medicine, Guangzhou Medical University, Guangzhou 510182, PR China.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Guangdong Province
Zitieren
APA
Chen, J., Liang, J., Liu, H., Chen, A., Feng, H., Liu, J., & Xie, G. (2026). One-Step Pulsed Electrodeposition of ZnO/ZnP Composite Coatings on Titanium Implants for Enhanced Antibacterial Activity and Biocompatibility. ACS Applied Bio Materials, 9(7), 3668-3680. https://doi.org/10.1021/acsabm.6c00148
Vancouver
Chen J, Liang J, Liu H, Chen A, Feng H, Liu J, et al. One-Step Pulsed Electrodeposition of ZnO/ZnP Composite Coatings on Titanium Implants for Enhanced Antibacterial Activity and Biocompatibility. ACS Applied Bio Materials. 2026;9(7):3668-3680. doi:10.1021/acsabm.6c00148
BibTeX
@article{Chen2026,
author = {Chen, Junchong and Liang, Jionghong and Liu, Haojie and Chen, Aiyi and Feng, Haixing and Liu, Jiangwen and Xie, Guie},
title = {One-Step Pulsed Electrodeposition of ZnO/ZnP Composite Coatings on Titanium Implants for Enhanced Antibacterial Activity and Biocompatibility},
journal = {ACS Applied Bio Materials},
year = {2026},
volume = {9},
number = {7},
pages = {3668--3680},
doi = {10.1021/acsabm.6c00148}
}
EUVIMED