Additively Manufactured Bioreactors for Scaffold-Coupled Electrical Stimulation
ACS Applied Bio Materials · 2026
DOI: 10.1021/acsabm.5c01381 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Bio Materials, 2026. Verfasst von Mone't Sawyer und 13 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Engineering Doctoral Program, Boise State University, Boise, Idaho 83725, United States. Hauptthemen laut MEDLINE: Bioreactors, Biocompatible Materials, Electric Stimulation, Tissue Scaffolds. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: NCRR NIH HHS, NIGMS NIH HHS, National Center for Research Resources.
Abstract (Originalsprache)
platforms often lack precision, scalability, and compatibility with 3D bioscaffolds. We present a modular bioreactor system that delivers low-voltage, bioscaffold-coupled ES via conductive graphene foam, enabling real-time waveform monitoring and live cell imaging. Components were fabricated using low-cost stereolithography with BioMed Clear resin and validated through mechanical, chemical, and cytocompatibility analyses. Printed parts exhibited high dimensional accuracy, retained mechanical integrity post-sterilization, and supported >90% cell viability. Electrical measurements confirmed ohmic behavior and signal fidelity under physiological conditions. Calcium imaging revealed a >230% fluorescence increase during stimulation, indicating a robust cellular response. This platform provides a reproducible, accessible tool for probing ES-driven behavior in electroactive 3D microenvironments.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Biomedical Engineering Doctoral Program, Boise State University, Boise, Idaho 83725, United States.
- Micron School for Materials Science and Engineering, Boise State University, Boise, Idaho 83725, United States.
- Biomolecular Sciences Graduate Program, Boise State University, Boise, Idaho 83725, United States.
- Mathematics and Physical Science, College of Idaho, Caldwell, Idaho 83605, United States.
- Department of Chemical and Biological Engineering, University of Idaho, Moscow, Idaho 83844, United States.
- Center for Advanced Energy Studies, Boise State University, Boise, Idaho 83725, United States.
ORCID-Profile: Josh Eixenberger, David Estrada
Förderung
- NCRR NIH HHS
- NIGMS NIH HHS
- National Center for Research Resources
- National Institute of General Medical Sciences
- Division of Materials Research
Zitieren
APA
Sawyer, M., Burgoyne, H., Lopez, E., White, F., Maryon, O., Bateman, A., Nelson, M. L., Eppel, M., Nielson, O., Montenegro-Brown, R., Eixenberger, J., Jaques, B., Hurley, M., & Estrada, D. (2026). Additively Manufactured Bioreactors for Scaffold-Coupled Electrical Stimulation. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.5c01381
Vancouver
Sawyer M, Burgoyne H, Lopez E, White F, Maryon O, Bateman A, et al. Additively Manufactured Bioreactors for Scaffold-Coupled Electrical Stimulation. ACS Applied Bio Materials. 2026. doi:10.1021/acsabm.5c01381
BibTeX
@article{Sawyer2026,
author = {Sawyer, Mone't and Burgoyne, Hailey and Lopez, Enrique and White, Felix and Maryon, Olivia and Bateman, Allyssa and Nelson, Miranda L and Eppel, Michael and Nielson, Olivia and Montenegro-Brown, Raquel and Eixenberger, Josh and Jaques, Brian and Hurley, Mike and Estrada, David},
title = {Additively Manufactured Bioreactors for Scaffold-Coupled Electrical Stimulation},
journal = {ACS Applied Bio Materials},
year = {2026},
doi = {10.1021/acsabm.5c01381}
}
EUVIMED