Itaconic Acid Oligomers for Electrostatically Spun Degradable Implantable Biobased Polyurethane
ACS Applied Bio Materials · 2024
DOI: 10.1021/acsabm.4c01526 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Bio Materials, 2024. Verfasst von Mengqiu Quan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Bio-based Polymeric Materials Technology and Application of Zhejiang Province, Laboratory of Polymers and Composites, Ningbo Instit…. Hauptthemen laut MEDLINE: Polyurethanes, Biocompatible Materials, Materials Testing, Particle Size. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: National Key Research and Development Program of China, S&T Innovation 2025 Major Special Program of Ningbo.
Abstract (Originalsprache)
Developing implantable medical materials with excellent comprehensive performance has important practical applications. Cardiovascular and bile ducts are characterized by various forms of diseases and high morbidity and mortality. One of the effective treatment modalities for such diseases is replacement surgery. Since commercially available materials for tubular organ sites are in short supply and the number of autologous and natural grafts is limited, the study of implantable materials that can be prepared in tubes is of great significance. This study reports on an implantable medical polyurethane material (IBP-PU) with a binary soft segment structure prepared by microwave synthesis. The material exhibits excellent mechanical properties (with a mechanical strength of 33.00 ± 4.02 MPa and a strain at break of 519.93 ± 53.44%), and stable thermomechanical properties (Td5% > 250 °C). The excellent biocompatibility of IBP-PU (hemolysis rate = 2.55% and cell survival on the fifth day over 100%, etc.) makes it suitable for implantable medical applications. Its appropriate degradation rate allows for slow in vivo degradation with the generation of tissues, and the degradation products are nontoxic and do not require removal by secondary surgery. Additionally, the material has been successfully prepared using electrostatic spinning technology, resulting in a 5 mm caliber. It is significant for small-caliber cardiovascular, bile duct, and other in vivo tubular grafts.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Key Laboratory of Bio-based Polymeric Materials Technology and Application of Zhejiang Province, Laboratory of Polymers and Composites, Ningbo Institute of Material Technology and Engineering, Chinese Academy of Science…
- National University of Singapore, 21 Lower Kent Ridge Rd, 119077 Singapore.
ORCID-Profile: Jing Chen
Förderung
- National Key Research and Development Program of China
- S&T Innovation 2025 Major Special Program of Ningbo
Zitieren
APA
Quan, M., Cui, M., Sha, G., Wang, Y., Fu, J., Yang, R., Zhu, J., & Chen, J. (2024). Itaconic Acid Oligomers for Electrostatically Spun Degradable Implantable Biobased Polyurethane. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.4c01526
Vancouver
Quan M, Cui M, Sha G, Wang Y, Fu J, Yang R, et al. Itaconic Acid Oligomers for Electrostatically Spun Degradable Implantable Biobased Polyurethane. ACS Applied Bio Materials. 2024. doi:10.1021/acsabm.4c01526
BibTeX
@article{Quan2024,
author = {Quan, Mengqiu and Cui, Minghui and Sha, Genzheng and Wang, Yuqing and Fu, Jiamei and Yang, Renlong and Zhu, Jin and Chen, Jing},
title = {Itaconic Acid Oligomers for Electrostatically Spun Degradable Implantable Biobased Polyurethane},
journal = {ACS Applied Bio Materials},
year = {2024},
doi = {10.1021/acsabm.4c01526}
}
EUVIMED