EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions

Berzah Yavuzyegit iD, Aikaterina Karali, Arianna De Mori, Nigel Smith, Sergey Usov, Pavel Shashkov, Roxane Bonithon iD, Gordon Blunn

ACS Applied Bio Materials · 18.03.2024 · 7 (3) · 1735-1747

DOI: 10.1021/acsabm.3c01169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Bio Materials, online erschienen am 27.02.2024. Verfasst von Berzah Yavuzyegit und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Pharmacy and Biomedical Sciences, Faculty of Science and Health, University of Portsmouth, St Michael's Building, White Swan Road, Portsmou…. Hauptthemen laut MEDLINE: Coated Materials, Biocompatible, Caustics. Die Arbeit wurde bisher 59-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovate UK.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Resorbable Mg and Mg alloys have gained significant interest as promising biomedical materials. However, corrosion of these alloys can lead to premature reduction in their mechanical properties, and therefore their corrosion rate needs to be controlled. The aim of this study is to select an appropriate environment where the effects of coatings on the corrosion rate of the underlying Mg alloy can be discerned and measured in a relatively short time period. The corrosion resistance of uncoated AZ31 alloy in different solutions [Hank's Balanced Salt Solution, 1× phosphate buffered solution (PBS), 4× PBS, 0.9%, 3.5%, and 5 M sodium chloride (NaCl)] was determined by measuring the weight loss over a 2 week period. Upon exposure to physiological solutions, the uncoated AZ31 alloys exhibited a variable weight increase of 0.4 ± 0.4%. 3.5% and 5 M NaCl solutions led to 0.27 and 9.7 mm/year corrosion rates, respectively, where the compositions of corrosion products from AZ31 in all saline solutions were similar. However, the corrosion of the AZ31 alloy when coated by electrochemical oxidation with two phosphate coatings, one containing fluorine (PF) and another containing both fluorine and silica (PFS), showed 0.3 and 0.25 mm/year corrosion rates, respectively. This is more than 30 times lower than that of the uncoated alloy (7.8 mm/year), making them promising candidates for corrosion protection in severe corrosive environments. Cross-sections of the samples showed that the coatings protected the alloy from corrosion by preventing access of saline to the alloy surface, and this was further reinforced by corrosion products from both the alloy and the coatings forming an additional barrier. The information in this paper provides a methodology for evaluating the effects of coatings on the rate of corrosion of magnesium alloys.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Coated Materials, BiocompatibleCausticsCorrosionSodium ChlorideFluorineAlloysPhosphatesSaline Solution

Stichwörter der Autor:innen

biodegradable implantsbiomaterialscorrosion inhibitorcorrosion mediasurface modification

Substanzen

Mg-Al-Zn-Mn-Si-Cu alloyCoated Materials, BiocompatibleCausticsSodium ChlorideFluorineAlloysPhosphatesSaline Solution

Autor:innen und Institutionen

  • School of Pharmacy and Biomedical Sciences, Faculty of Science and Health, University of Portsmouth, St Michael's Building, White Swan Road, Portsmouth PO1 2DT, U.K.
  • Mechanical Engineering Department, Recep Tayyip Erdogan University, Rize 53100, Turkey.
  • School of Mechanical & Design Engineering Faculty of Technology, University of Portsmouth, Anglesea Building, Anglesea Road, Portsmouth PO1 3DJ, U.K.
  • BioCera Medical Limited, 3b Homefield Road, Haverhill CB9 8QP, Suffolk, U.K.

ORCID-Profile: Berzah Yavuzyegit, Roxane Bonithon

Förderung

  • Innovate UK

Zitieren

APA

Yavuzyegit, B., Karali, A., De Mori, A., Smith, N., Usov, S., Shashkov, P., Bonithon, R., & Blunn, G. (2024). Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions. ACS Applied Bio Materials, 7(3), 1735-1747. https://doi.org/10.1021/acsabm.3c01169

Vancouver

Yavuzyegit B, Karali A, De Mori A, Smith N, Usov S, Shashkov P, et al. Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions. ACS Applied Bio Materials. 2024;7(3):1735-1747. doi:10.1021/acsabm.3c01169

BibTeX
@article{Yavuzyegit2024,
  author = {Yavuzyegit, Berzah and Karali, Aikaterina and De Mori, Arianna and Smith, Nigel and Usov, Sergey and Shashkov, Pavel and Bonithon, Roxane and Blunn, Gordon},
  title = {Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions},
  journal = {ACS Applied Bio Materials},
  year = {2024},
  volume = {7},
  number = {3},
  pages = {1735--1747},
  doi = {10.1021/acsabm.3c01169}
}
Kostenlos starten →