EUVIMEDEUVIMED entdecken
Crossref

Degradation Adaptability Assessment of Semisolid Powder Molded Mg–Zn–Mn Alloys for Orthopedic Applications

Xia Luo iD, Mingyu Li, Huawei Cai iD, Shanghui Yang, Lijing Hao iD, Thomas Ebel, Heike Helmholz iD, Bensheng Huang, Xiaohong Wang

ACS Applied Bio Materials · 2023

DOI: 10.1021/acsabm.3c00710 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Bio Materials, 2023. Verfasst von Xia Luo und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of New Energy and Materials, Southwest Petroleum University, Chengdu 610500, P. R. China. Hauptthemen laut MEDLINE: Zinc, Caustics. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: West China Hospital, Sichuan University, National Key Research and Development Program of China, Medical Science and Technology Foundation of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Semisolid powder molding was used to prepare the medical Mg-6Zn alloy; in order to further improve its degradation adaptability, 0.5 and 1 wt % Mn were added. Then, the effect of the forming temperature (540, 560, 580, and 600 °C) on the in vitro degradation behavior of the prepared Mg-6Zn-xMn (x = 0.5, 1 wt %) was analyzed, and the optimized alloy was obtained. Finally, the biocompatibility and in vivo degradation performance of the optimized and Mn-free alloys were evaluated. Importantly, single-photon emission tomographic imaging (SPECT/CT) was first applied to monitor the in vivo degradation process. The results show that the corrosion mechanism of the Mn-free alloy is microgalvanic corrosion control with corrosive pitting. After adding Mn, the in vitro degradation rate decreases by half (0.17 ± 0.01 mm/year) as the forming temperature increases to 600 °C, and Mg-6Zn-1Mn prepared at 600 °C is the optimized alloy. Mn addition improves the corrosion product film protection and discontinuous secondary phases, and thus, the corrosion mechanism is changed to corrosive pitting control. Additionally, semisolid powder molding is an easy method to prepare alloys with low average pore interconnectivity (

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZincCausticsMaterials TestingPowdersMagnesiumAlloys

Stichwörter der Autor:innen

degradation adaptabilitymedical Mg–Zn–Mn alloynuclear imagingorthopedic applicationssemisolid powder molding

Substanzen

PowdersZincCausticsMagnesiumAlloys

Autor:innen und Institutionen

  • School of New Energy and Materials, Southwest Petroleum University, Chengdu 610500, P. R. China.
  • Department of Nuclear Medicine & Laboratary of Clinical Nuclear Medicine, West China Hospital of Sichuan University, Chengdu 610041, P. R. China.
  • National Engineering Research Center for Tissue Restoration and Reconstruction, School of Materials Science and Engineering, South China University of Technology, Guangzhou 510006, P. R. China.
  • Institute of Metallic Biomaterials, Helmholtz-Zentrum Hereon GmbH, 21502 Geesthacht, Germany.

ORCID-Profile: Xia Luo, Huawei Cai, Lijing Hao, Heike Helmholz

Förderung

  • West China Hospital, Sichuan University
  • National Key Research and Development Program of China
  • Medical Science and Technology Foundation of Guangdong Province
  • Science and Technology Department of Sichuan Province
  • Fundamental Research Funds for the Central Universities
  • Natural Science Foundation of Guangdong Province
  • National Natural Science Foundation of China
  • Applied Basic Research Program of Guangzhou city of China

Zitieren

APA

Luo, X., Li, M., Cai, H., Yang, S., Hao, L., Ebel, T., Helmholz, H., Huang, B., & Wang, X. (2023). Degradation Adaptability Assessment of Semisolid Powder Molded Mg–Zn–Mn Alloys for Orthopedic Applications. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.3c00710

Vancouver

Luo X, Li M, Cai H, Yang S, Hao L, Ebel T, et al. Degradation Adaptability Assessment of Semisolid Powder Molded Mg–Zn–Mn Alloys for Orthopedic Applications. ACS Applied Bio Materials. 2023. doi:10.1021/acsabm.3c00710

BibTeX
@article{Luo2023,
  author = {Luo, Xia and Li, Mingyu and Cai, Huawei and Yang, Shanghui and Hao, Lijing and Ebel, Thomas and Helmholz, Heike and Huang, Bensheng and Wang, Xiaohong},
  title = {Degradation Adaptability Assessment of Semisolid Powder Molded Mg–Zn–Mn Alloys for Orthopedic Applications},
  journal = {ACS Applied Bio Materials},
  year = {2023},
  doi = {10.1021/acsabm.3c00710}
}
Kostenlos starten →