EUVIMEDEUVIMED entdecken
Crossref

Multi-Stimulus Soft Actuators from Aerosol Jet Printed MXene-Cellulose Composite

Brian Cole iD, Yilin Zhao, Anna Bethke, Joyce Hu, Thomas Hudgins, Marcos Barrionuevo, William Collins, Qiangu Yan, Daniel Franke, Haozhe Wang iD, Aaron D Franklin iD

Nano Letters · 29.10.2025 · 25 (43) · 15501-15508

DOI: 10.1021/acs.nanolett.5c03256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nano Letters, online erschienen am 20.10.2025. Verfasst von Brian Cole und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical & Computer Engineering, Duke University, Durham, North Carolina 27708, United States. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Heart, Lung, and Blood Institute, Division of Electrical, Communications and Cyber Systems, Forest Products Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The evolution of next-generation flexible, stretchable, and conformal microrobotics hinges significantly on advances in fabrication methods. There is a need to enhance the scalability of actuator feature dimensions and to increase the design versatility. This study demonstrates the additive manufacturing of soft multi-stimulus thermomechanical actuators based on a composite of transition metal carbide (TMC, MXene) and cellulose nanofiber (CNF) nanomaterials using aerosol jet printing (AJP) for scalable/customizable actuation. Aqueous MXene-CNF films with tunable electrothermal and photothermal properties were printed onto polycarbonate (PC) membranes for wired and/or wireless operation, having full reversibility with induced heating below 120 °C. Printed devices as small as 5 mm2 and 2.5 mm2 yielded sharp curvatures of 0.92 cm-1 and 0.87 cm-1, respectively. By printing MXene-CNF to select regions on both sides of the substrate, complex actuation modes were realized with directional, reversible control. This work highlights the promise of AJP-fabricated MXene-CNF systems for soft robotics applications.

Schlagwörter

Stichwörter der Autor:innen

Electromechanical ActuatorMXeneMXene-CNFPhotomechanical ActuatorSoft RoboticsThermomechanical Actuation

Autor:innen und Institutionen

  • Department of Electrical & Computer Engineering, Duke University, Durham, North Carolina 27708, United States.
  • Department of Electrical Engineering, Arizona State University, Tempe, Arizona 85281, United States.
  • Department of Biomedical Engineering, Duke University, Durham, North Carolina 27708, United States.
  • Department of Biology, Duke University, Durham, North Carolina 27708, United States.
  • Forest Products Laboratory, Madison, Wisconsin 53726, United States.
  • Department of Chemistry, Duke University, Durham, North Carolina 27708, United States.

ORCID-Profile: Brian Cole, Haozhe Wang, Aaron D Franklin

Förderung

  • National Heart, Lung, and Blood Institute
  • Division of Electrical, Communications and Cyber Systems
  • Forest Products Laboratory

Zitieren

APA

Cole, B., Zhao, Y., Bethke, A., Hu, J., Hudgins, T., Barrionuevo, M., Collins, W., Yan, Q., Franke, D., Wang, H., & Franklin, A. D. (2025). Multi-Stimulus Soft Actuators from Aerosol Jet Printed MXene-Cellulose Composite. Nano Letters, 25(43), 15501-15508. https://doi.org/10.1021/acs.nanolett.5c03256

Vancouver

Cole B, Zhao Y, Bethke A, Hu J, Hudgins T, Barrionuevo M, et al. Multi-Stimulus Soft Actuators from Aerosol Jet Printed MXene-Cellulose Composite. Nano Letters. 2025;25(43):15501-15508. doi:10.1021/acs.nanolett.5c03256

BibTeX
@article{Cole2025,
  author = {Cole, Brian and Zhao, Yilin and Bethke, Anna and Hu, Joyce and Hudgins, Thomas and Barrionuevo, Marcos and Collins, William and Yan, Qiangu and Franke, Daniel and Wang, Haozhe and Franklin, Aaron D},
  title = {Multi-Stimulus Soft Actuators from Aerosol Jet Printed MXene-Cellulose Composite},
  journal = {Nano Letters},
  year = {2025},
  volume = {25},
  number = {43},
  pages = {15501--15508},
  doi = {10.1021/acs.nanolett.5c03256}
}
Kostenlos starten →