Carbon-Dot-Assisted Room-Temperature Crystallization of Quasi-Two-Dimensional Perovskite Emitting Layers for Annealing-Free Light-Emitting Diodes
Nano Letters · 25.06.2025 · 25 (25) · 10063-10071
DOI: 10.1021/acs.nanolett.5c01827 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nano Letters, online erschienen am 11.06.2025. Verfasst von Yulu Hua und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Jilin University, Changchun 130012 P. R. China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: Science and Technology Development Fund, National Key Research and Development Program of China, Department of Science and Technology of Jilin Province.
Abstract (Originalsprache)
The development of high-performance perovskite light-emitting diodes (PeLEDs) typically requires thermal annealing to optimize the crystallization and film quality. However, this energy-intensive process limits the scalability and environmental sustainability of perovskite-based devices. Here, we demonstrate a novel approach to fabricating high-quality perovskite emitting layers without the need for annealing, utilizing carbon dots (CDs) as an interface layer. The CDs, functionalized with abundant potassium ions, carboxylate, and amino groups, serve as nucleation centers and enhance precursor interactions. This facilitates room-temperature perovskite crystallization by lowering the formation energy, guiding uniform crystal growth, and improving the overall quality of the perovskite layer. Consequently, annealing-free PeLEDs demonstrate superior performance with a maximum external quantum efficiency of 20.5%, and large-area PeLEDs (225 mm2) exhibit a high efficiency of 16.6%. This strategy not only eliminates the need for thermal processing but also enhances the electroluminescent performance, offering a scalable, low-cost, and energy-efficient pathway for fabricating high-performance perovskite-based optoelectronic devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Jilin University, Changchun 130012 P. R. China.
- PhysNano Department, ITMO University, Saint Petersburg 197101 Russia.
- Department of Materials Science and Engineering and Centre for Functional Photonics, City University of Hong Kong, Kowloon, Hong Kong SAR 999077, P. R. China.
- Joint Key Laboratory of the Ministry of Education, Institute of Applied Physics and Materials Engineering, University of Macau, Avenida da Universidade, Taipa, Macau SAR 999078, P. R. China.
ORCID-Profile: Xiaoyu Zhang, Songnan Qu
Förderung
- Science and Technology Development Fund
- National Key Research and Development Program of China
- Department of Science and Technology of Jilin Province
- National Natural Science Foundation of China
Zitieren
APA
Hua, Y., Bai, X., Qu, Y., Li, D., Zhang, X., Ushakova, E. V., Qu, S., & Zheng, W. (2025). Carbon-Dot-Assisted Room-Temperature Crystallization of Quasi-Two-Dimensional Perovskite Emitting Layers for Annealing-Free Light-Emitting Diodes. Nano Letters, 25(25), 10063-10071. https://doi.org/10.1021/acs.nanolett.5c01827
Vancouver
Hua Y, Bai X, Qu Y, Li D, Zhang X, Ushakova EV, et al. Carbon-Dot-Assisted Room-Temperature Crystallization of Quasi-Two-Dimensional Perovskite Emitting Layers for Annealing-Free Light-Emitting Diodes. Nano Letters. 2025;25(25):10063-10071. doi:10.1021/acs.nanolett.5c01827
BibTeX
@article{Hua2025,
author = {Hua, Yulu and Bai, Xuewei and Qu, Yanfei and Li, Di and Zhang, Xiaoyu and Ushakova, Elena V and Qu, Songnan and Zheng, Weitao},
title = {Carbon-Dot-Assisted Room-Temperature Crystallization of Quasi-Two-Dimensional Perovskite Emitting Layers for Annealing-Free Light-Emitting Diodes},
journal = {Nano Letters},
year = {2025},
volume = {25},
number = {25},
pages = {10063--10071},
doi = {10.1021/acs.nanolett.5c01827}
}
EUVIMED