EUVIMEDEUVIMED entdecken
Crossref

Post-Functionalized Vinyl-Addition Polynorbornenes as Modular Platforms for Anion Exchange Membranes: Structure–Property Relationships

Seungbae Jeon, Eun Woo Lee, Kyulee Jung, Seungjae Lee, Yeongsik Kim, Woohwa Lee, Taehyoung Kim, Hyun Kim, Chang-Geun Chae, Dong-Gyun Kim, Jae Hun Lee, Sungmin Park

Macromolecules · 10.11.2026 · 59 (21) · 12520-12535

DOI: 10.1021/acs.macromol.6c01487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecules, online erschienen am 16.10.2026. Verfasst von Seungbae Jeon und 11 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Gefördert von: Korea Research Institute of Chemical Technology, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fully hydrocarbon-based anion exchange membranes (AEMs) were developed through a facile post-polymerization strategy using vinyl-addition polynorbornene (VA-PNB) backbones. A high-molecular-weight poly(5-vinyl-2-norbornene) (PVNB) precursor was synthesized via chemoselective vinyl-addition polymerization, followed by hydrobromination to introduce tunable brominated functionalities. Subsequent thermal treatment enabled crosslinking through residual vinyl groups without additional crosslinkers. By systematically varying the brominated norbornene content (30–90 mol %), the relationships among ionic composition, crosslinking structure, hydration behavior, mechanical properties, and electrochemical performance were investigated. SAXS and TEM analyses revealed phase-separated ionic aggregates with characteristic d-spacings of approximately 1 nm. Increasing ionic-site density enhanced hydroxide transport but also induced excessive swelling and deterioration of mechanical properties under hydrated conditions. Among the membranes investigated, P(VNB-r-NBQA)50 exhibited a balanced combination of dimensional stability, mechanical properties, and electrochemical performance, showing a low area-specific resistance (0.060 Ω·cm2 at 50 °C) and superior alkaline water electrolysis single-cell performance compared with a commercial FAA membrane. The membrane achieved a current density of 3.06 A/cm2 at 2.0 V and 60 °C, which is approximately 15% higher than that of the commercial FAA membrane (2.66 A/cm2) under identical conditions. Although excessive hydration limited long-term operational stability, this study demonstrates that post-functionalized VA-PNBs provide a versatile platform for designing hydrocarbon-based AEMs and offers important insights into balancing ionic conductivity, swelling behavior, and mechanical stability.

Förderung

  • Korea Research Institute of Chemical Technology
  • National Research Foundation of Korea

Zitieren

APA

Jeon, S., Lee, E. W., Jung, K., Lee, S., Kim, Y., Lee, W., Kim, T., Kim, H., Chae, C., Kim, D., Lee, J. H., & Park, S. (2026). Post-Functionalized Vinyl-Addition Polynorbornenes as Modular Platforms for Anion Exchange Membranes: Structure–Property Relationships. Macromolecules, 59(21), 12520-12535. https://doi.org/10.1021/acs.macromol.6c01487

Vancouver

Jeon S, Lee EW, Jung K, Lee S, Kim Y, Lee W, et al. Post-Functionalized Vinyl-Addition Polynorbornenes as Modular Platforms for Anion Exchange Membranes: Structure–Property Relationships. Macromolecules. 2026;59(21):12520-12535. doi:10.1021/acs.macromol.6c01487

BibTeX
@article{Jeon2026,
  author = {Jeon, Seungbae and Lee, Eun Woo and Jung, Kyulee and Lee, Seungjae and Kim, Yeongsik and Lee, Woohwa and Kim, Taehyoung and Kim, Hyun and Chae, Chang-Geun and Kim, Dong-Gyun and Lee, Jae Hun and Park, Sungmin},
  title = {Post-Functionalized Vinyl-Addition Polynorbornenes as Modular Platforms for Anion Exchange Membranes: Structure–Property Relationships},
  journal = {Macromolecules},
  year = {2026},
  volume = {59},
  number = {21},
  pages = {12520--12535},
  doi = {10.1021/acs.macromol.6c01487}
}
Kostenlos starten →