EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Graphene Dispersion via Polymer Grafting

Yang Wang, Wenjie Xia iD, Andrea Giuntoli iD

Macromolecules · 11.03.2025 · 58 (5) · 2224-2236

DOI: 10.1021/acs.macromol.4c02249 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecules, online erschienen am 02.01.2025. Verfasst von Yang Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Zernike Institute for Advanced Materials, University of Groningen, 9747 AG Groningen, The Netherlands. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Rijksuniversiteit Groningen, Division of Civil, Mechanical and Manufacturing Innovation, Iowa State University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The dispersion of graphene sheets within a polymer matrix is critical for the performance of graphene-reinforced polymer nanocomposites, particularly in achieving optimal percolation and electrical conductivity. However, accurately characterizing and controlling the dispersion of 2D graphene in polymer melts remains a significant challenge due to the complex and varied configurations that graphene sheets can adopt. Herein, we employ coarse-grained molecular dynamics simulations to investigate how the grafting density (g) and grafted chain length (n) of poly­(methyl methacrylate), p­(MMA), affect graphene dispersion, where graphene is classified into three distinct morphologies, i.e., “aggregation”, “intercalated”, and “unbound”. We find that increasing g and n enhances graphene dispersion, evidenced by a higher dispersity parameter (fd), stronger interfacial interactions, greater Gaussian surface area of graphene clusters, and lower aggregation energy (EAggregation). Our results also indicate that a higher fd is linked to a higher Young’s modulus in the nanocomposite, reaching a maximum of 4.18 GPa. However, the electrical conductivity of nanocomposites initially rises with increasing g and n but declines beyond g > 5% and n > 10 due to reduced conductive pathways caused by graphene overdispersion, as revealed by the conductive edge analysis. Additionally, the free polymer fraction and chain length significantly influence toughness, and grafting p­(MMA) chains on graphene slows down the dynamics of the surrounding polymer due to the intrinsic stiffness of graphene, an effect more pronounced at higher fd (well dispersed). These findings present an effective approach for tuning and precisely characterizing graphene dispersity, clarifying its influence on material properties and forming the interfacial design of advanced nanocomposites reinforced with functional two-dimensional nanofillers.

Autor:innen und Institutionen

  • Zernike Institute for Advanced Materials, University of Groningen, 9747 AG Groningen, The Netherlands.
  • Department of Theoretical Physics & Center for Biophysics, Saarland University, 66123 Saarbrücken, Germany.
  • Department of Aerospace Engineering, Iowa State University, Ames, Iowa 50011, United States.

ORCID-Profile: Wenjie Xia, Andrea Giuntoli

Förderung

  • Rijksuniversiteit Groningen
  • Division of Civil, Mechanical and Manufacturing Innovation
  • Iowa State University

Zitieren

APA

Wang, Y., Xia, W., & Giuntoli, A. (2025). Optimizing Graphene Dispersion via Polymer Grafting. Macromolecules, 58(5), 2224-2236. https://doi.org/10.1021/acs.macromol.4c02249

Vancouver

Wang Y, Xia W, Giuntoli A. Optimizing Graphene Dispersion via Polymer Grafting. Macromolecules. 2025;58(5):2224-2236. doi:10.1021/acs.macromol.4c02249

BibTeX
@article{Wang2025,
  author = {Wang, Yang and Xia, Wenjie and Giuntoli, Andrea},
  title = {Optimizing Graphene Dispersion via Polymer Grafting},
  journal = {Macromolecules},
  year = {2025},
  volume = {58},
  number = {5},
  pages = {2224--2236},
  doi = {10.1021/acs.macromol.4c02249}
}
Kostenlos starten →