EUVIMEDEUVIMED entdecken
Crossref

Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites

Fanfan Lv, Wei Wang, Yuan Gao, Kuaishe Wang

Langmuir · 20.11.2026

DOI: 10.1021/acs.langmuir.6c05082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Langmuir, online erschienen am 20.11.2026. Verfasst von Fanfan Lv und 3 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Gefördert von: Xi'an Municipal Bureau of Science and Technology, Education Department of Shaanxi Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing high-performance and eco-friendly oil additives capable of operating under extreme-pressure conditions remains a vital challenge for advanced mechanical systems. This work investigates whether combining layered black phosphorus (BP) with fullerene (C60) can improve lubrication performance beyond that achieved with either additive alone, and examines the possible physicochemical origins of the observed effects. BP–C60 nanocomposites were prepared by liquid-phase exfoliation followed by ball milling, and their performance in polyalphaolefin (PAO4) was evaluated by tribological testing and wear-surface characterization, together with molecular dynamics (MD) simulations. At an optimal mass ratio of 2:3, the lubricant achieves a 24% reduction in average coefficient of friction (COF) and an 81.2% decrease in wear rate compared to pure PAO4. Furthermore, under extreme contact pressures (828–1314 MPa), the composite system delivers load-bearing capacity, yielding a minimum average COF of 0.0881 and up to an 87.1% reduction in wear rate. Wear-surface characterization reveals that mechanical shear and frictional heat induce the in situ formation of dense, 33.0–72.6 nm tribofilms consisting of iron oxides (Fe2O3, Fe3O4), iron carbide (Fe–C), amorphous carbon, and oxidized phosphorus species (P–O/P═O). MD simulations showed lower interfacial shear stress for the BP–C60 system and detected relative motion of the lubricant components, as well as rotation and orientation changes of C60. Together, the experimental and simulation results suggest that BP shear accommodation, C60 interfacial motion, and tribofilm formation may contribute to the improved lubrication performance. This work demonstrates the performance of the BP–C60 additive under the tested conditions and provides a basis for further application under more demanding operating conditions.

Förderung

  • Xi'an Municipal Bureau of Science and Technology
  • Education Department of Shaanxi Province
  • National Natural Science Foundation of China
  • Shaanxi Provincial Science and Technology Department
  • Natural Science Foundation of Shaanxi Province
  • Key Research and Development Projects of Shaanxi Province
  • Shaanxi Laboratory of Advanced Materials
  • Organization Department of the Communist Party of China Shaanxi Provincial Committee

Zitieren

APA

Lv, F., Wang, W., Gao, Y., & Wang, K. (2026). Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites. Langmuir. https://doi.org/10.1021/acs.langmuir.6c05082

Vancouver

Lv F, Wang W, Gao Y, Wang K. Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites. Langmuir. 2026. doi:10.1021/acs.langmuir.6c05082

BibTeX
@article{Lv2026,
  author = {Lv, Fanfan and Wang, Wei and Gao, Yuan and Wang, Kuaishe},
  title = {Friction and Wear of Lubricating Oil with Black Phosphorus–Fullerene Nanocomposites},
  journal = {Langmuir},
  year = {2026},
  doi = {10.1021/acs.langmuir.6c05082}
}
Kostenlos starten →