Deep Eutectic Solvent-Assisted Electrodeposition of Dendritic FeCoNiCu Medium-Entropy Alloy for Efficient Alkaline Oxygen Evolution
Langmuir · 10.11.2026 · 42 (44) · 32688-32699
DOI: 10.1021/acs.langmuir.6c04679 ↗Kurz gefasst
Fachartikel in der Zeitschrift Langmuir, online erschienen am 27.10.2026. Verfasst von Hao Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgical Engineering, Anhui University of Technology, Maanshan243002, China. Die Arbeit nennt 50 Literaturangaben. Gefördert von: Natural Science Foundation of Anhui Province, National Natural Science Foundation of China (NSFC).
Abstract (Originalsprache)
Developing low-cost and durable non-noble-metal electrocatalysts for the oxygen evolution reaction (OER) is essential for efficient alkaline water electrolysis. Herein, FeCoNiCu medium-entropy alloy electrodes with tunable dendritic architectures were prepared on Cu substrates by one-step potentiostatic electrodeposition in a choline chloride–urea (ChCl–urea) deep eutectic solvent (DES). The effects of deposition potential, deposition time, and CuCl concentration on the alloy composition, morphology, and OER performance were systematically investigated. Under the optimized conditions of −1.4 V vs Ag, 2 h, and 0.2 M CuCl, a short and thick three-dimensional dendritic network was obtained. This structure provided abundant accessible catalytic sites and efficient electron-transport pathways. The optimized FeCoNiCu electrode required an overpotential of 285 mV (corresponding to 1.515 V vs RHE) to reach 10 mA cm–2 in 1 M KOH, which was 107 mV lower than that of a commercial RuO2–IrO2 catalyst under the same evaluation conditions. The electrode also showed favorable charge-transfer kinetics, with an Rct of 2.183 Ω cm2, and maintained stable activity during a 120 h chronopotentiometric test and 2000 CV cycles. Post-OER XPS analysis suggests that Fe, Co, and Ni were reconstructed into oxide/oxyhydroxide-rich catalytically relevant oxyhydroxide-rich species, whereas Cu was less extensively oxidized and may contribute mainly to electrical conductivity and structural stabilization. This work provides a DES-assisted electrodeposition strategy for designing macroscopically homogeneous dendritic medium-entropy alloy electrocatalysts for alkaline OER.
Autor:innen und Institutionen
- School of Metallurgical Engineering, Anhui University of Technology, Maanshan243002, China.
- Jinchang Bengxinwangda Environmental Protection Technology Co., Ltd, Jinchang737100, China.
ORCID-Profile: Shiwei He
Förderung
- Natural Science Foundation of Anhui Province
- National Natural Science Foundation of China (NSFC)
Zitieren
APA
Wang, H., Liu, R., Pan, H., Wang, J., Hu, C., & He, S. (2026). Deep Eutectic Solvent-Assisted Electrodeposition of Dendritic FeCoNiCu Medium-Entropy Alloy for Efficient Alkaline Oxygen Evolution. Langmuir, 42(44), 32688-32699. https://doi.org/10.1021/acs.langmuir.6c04679
Vancouver
Wang H, Liu R, Pan H, Wang J, Hu C, He S. Deep Eutectic Solvent-Assisted Electrodeposition of Dendritic FeCoNiCu Medium-Entropy Alloy for Efficient Alkaline Oxygen Evolution. Langmuir. 2026;42(44):32688-32699. doi:10.1021/acs.langmuir.6c04679
BibTeX
@article{Wang2026,
author = {Wang, Hao and Liu, Rui and Pan, Haoyi and Wang, Jiangfei and Hu, Changbin and He, Shiwei},
title = {Deep Eutectic Solvent-Assisted Electrodeposition of Dendritic FeCoNiCu Medium-Entropy Alloy for Efficient Alkaline Oxygen Evolution},
journal = {Langmuir},
year = {2026},
volume = {42},
number = {44},
pages = {32688--32699},
doi = {10.1021/acs.langmuir.6c04679}
}
EUVIMED